Analysis of Alloy 718 surfaces milled by abrasive waterjet and post-processed by plain waterjet technology

Simple item page
dc.contributor.authorAlberdi, A.
dc.contributor.authorRivero, A.
dc.contributor.authorArtaza, T.
dc.contributor.authorLamikiz, A.
dc.contributor.institutionFABRIC_INTEL
dc.contributor.institutionSG
dc.date.issued2017
dc.descriptionPublisher Copyright: © 2017
dc.description.abstractThis work analyzes the surfaces obtained in Alloy 718 when they are milled by Abrasive Waterjet (AWJ) at different conditions. This analysis revealed that all surfaces have a homogeneous roughness in the transversal and the longitudinal directions, present embedded abrasive particles and have hardened about 50% with respect to the untreated bulk Alloy 718. On the other hand, Plain Waterjet (PWJ) technology was used for removing the abrasive particles embedded in surfaces of Alloy 718 milled previously by AWJ technology. The effect of this process on the surface characteristics is also analyzed. For all tested conditions, this technology removed all the particles embedded in the surface. In addition, the PWJ technology process in general smoothened the surfaces produced by AWJ milling and it also released near-surface stresses.en
dc.description.statusPeer reviewed
dc.format.extent8
dc.format.extent836028
dc.identifier.citationAlberdi , A , Rivero , A , Artaza , T & Lamikiz , A 2017 , ' Analysis of Alloy 718 surfaces milled by abrasive waterjet and post-processed by plain waterjet technology ' , Procedia Manufacturing , vol. 13 , pp. 679-686 . https://doi.org/10.1016/j.promfg.2017.09.163
dc.identifier.doi10.1016/j.promfg.2017.09.163
dc.identifier.issn2351-9789
dc.identifier.otherresearchoutputwizard: 11556/499
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=85030831621&partnerID=8YFLogxK
dc.language.isoeng
dc.relation.ispartofProcedia Manufacturing
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subject.keywordsWaterjet
dc.subject.keywordsAlloy 718
dc.subject.keywordsPost-treatment
dc.subject.keywordsMilling
dc.subject.keywordsFatigue
dc.subject.keywordsWaterjet
dc.subject.keywordsAlloy 718
dc.subject.keywordsPost-treatment
dc.subject.keywordsMilling
dc.subject.keywordsFatigue
dc.subject.keywordsIndustrial and Manufacturing Engineering
dc.subject.keywordsArtificial Intelligence
dc.subject.keywordsFunding Info
dc.subject.keywordsThe authors acknowledge the support of the Ministry of Economy and Competitiveness of the Spanish Government_x000D_ for support of project EVOCA II (reference DPI2013-45308-P).
dc.subject.keywordsThe authors acknowledge the support of the Ministry of Economy and Competitiveness of the Spanish Government_x000D_ for support of project EVOCA II (reference DPI2013-45308-P).
dc.titleAnalysis of Alloy 718 surfaces milled by abrasive waterjet and post-processed by plain waterjet technologyen
dc.typejournal article
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
1-s2.0-S2351978917308004-main.pdf
Size:
816.43 KB
Format:
Adobe Portable Document Format
Download