Browsing by Author "Kapteijn, Freek"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
Item Fabrication of Defect-Free P84® Polyimide Hollow Fiber for Gas Separation: Pathway to Formation of Optimized Structure: Pathway to formation of optimized structure(2019-12) Etxeberria-Benavides, Miren; Karvan, Oguz; Kapteijn, Freek; Gascon, Jorge; David, Oana; Tecnalia Research & Innovation; TECNOLOGÍA DE MEMBRANAS E INTENSIFICACIÓN DE PROCESOSThe elimination of the additional defect healing post-treatment step in asymmetric hollow fiber manufacturing would result in a significant reduction in membrane production cost. However, obtaining integrally skinned polymeric asymmetric hollow fiber membranes with an ultrathin and defect-free selective layer is quite challenging. In this study, P84® asymmetric hollow fiber membranes with a highly thin (~56 nm) defect-free skin were successfully fabricated by fine tuning the dope composition and spinning parameters using volatile additive (tetrahydrofuran, THF) as key parameters. An extensive experimental and theoretical study of the influence of volatile THF addition on the solubility parameter of the N-methylpyrrolidone/THF solvent mixture was performed. Although THF itself is not a solvent for P84®, in a mixture with a good solvent for the polymer, like N-Methyl-2-pyrrolidone (NMP), it can be dissolved at high THF concentrations (NMP/THF ratio > 0.52). The as-spun fibers had a reproducible ideal CO2/N2 selectivity of 40, and a CO2 permeance of 23 GPU at 35 °C. The fiber production can be scaled-up with retention of the selectivity.Item High performance mixed matrix membranes (MMMs) composed of ZIF-94 filler and 6FDA-DAM polymer(2018-03-15) Etxeberria-Benavides, Miren; David, Oana; Johnson, Timothy; Łozińska, Magdalena M.; Orsi, Angelica; Wright, Paul A.; Mastel, Stefan; Hillenbrand, Rainer; Kapteijn, Freek; Gascon, Jorge; Tecnalia Research & Innovation; TECNOLOGÍA DE MEMBRANAS E INTENSIFICACIÓN DE PROCESOSCarbon capture and storage (CCS) using membranes for the separation of CO2 holds great promise for the reduction of atmospheric CO2 emissions from fuel combustion and industrial processes. Among the different process outlines, post-combustion CO2 capture could be easily implemented in existing power plants. However, for this technology to become viable, new membrane materials have to be developed. In this article we present the development of high performance mixed matrix membranes (MMMs) composed of ZIF-94 filler and 6FDADAM polymer matrix. The CO2/N2 separation performance was evaluated by mixed gas tests (15CO2:85N2) at 25 °C and 1–4 bar transmembrane pressure difference. The CO2 membrane permeability was increased by the addition of the ZIF-94 particles, maintaining a constant CO2/N2 selectivity of ~22. The largest increase in CO2 permeability of ~ 200% was observed for 40 wt% ZIF-94 loading, reaching the highest permeability (2310 Barrer) at similar selectivity among 6FDA-DAM MMMs reported in literature. For the first time, the ZIF-94 metal organic framework crystals with particle size smaller than 500 nm were synthesized using nonhazardous solvent (tetrahydrofuran and methanol) instead of dimethylformamide (DMF) in a scalable process. Membranes were characterized by three non-invasive image techniques, i.e. SEM, AFM and nanoscale infrared imaging by scattering-type scanning near-field optical microscopy (s-SNOM). The combination of these techniques demonstrates a very good dispersion and interaction of the filler in the polymer layer, even at very high loadings.Item Metal-organic framework based mixed matrix membranes: a solution for highly efficient CO2 capture?: A solution for highly efficient CO2 capture?(2015-04-21) Seoane, Beatriz; Coronas, Joaquin; Gascon, Ignacio; Etxeberria-Benavides, Miren; Karvan, Oguz; Caro, Juergen; Kapteijn, Freek; Gascon, Jorge; Caro, Jürgen; Tecnalia Research & Innovation; TECNOLOGÍA DE MEMBRANAS E INTENSIFICACIÓN DE PROCESOSThe field of metal-organic framework based mixed matrix membranes (M(4)s) is critically reviewed, with special emphasis on their application in CO2 capture during energy generation. After introducing the most relevant parameters affecting membrane performance, we define targets in terms of selectivity and productivity based on existing literature on process design for pre- and post-combustion CO2 capture. Subsequently, the state of the art in M(4)s is reviewed against these targets. Because final application of these membranes will only be possible if thin separation layers can be produced, the latest advances in the manufacture of M-4 hollow fibers are discussed. Finally, the recent efforts in understanding the separation performance of these complex composite materials and future research directions are outlined.Item PBI mixed matrix hollow fiber membrane: Influence of ZIF-8 filler over H2/CO2 separation performance at high temperature and pressure: Influence of ZIF-8 filler over H2/CO2 separation performance at high temperature and pressure(2020-04-15) Etxeberria-Benavides, Miren; Johnson, Timothy; Cao, Shuai; Zornoza, Beatriz; Coronas, Joaquín; Sanchez-Lainez, Javier; Sabetghadam, Anahid; Liu, Xinlei; Andres-Garcia, Eduardo; Kapteijn, Freek; Gascon, Jorge; David, Oana; Tecnalia Research & Innovation; TECNOLOGÍA DE MEMBRANAS E INTENSIFICACIÓN DE PROCESOSHigh performance and commercially attractive mixed-matrix membranes were developed for H2/CO2 separation via a scalable hollow fiber spinning process. Thin (~300 nm) and defect-free selective layers were successfully created with a uniform distribution of the nanosized (~60 nm) zeolitic-imidazole framework (ZIF-8) filler within the polymer (polybenzimidazole, PBI) matrix. These membranes were able to operate at high temperature (150 °C) and pressure (up to 30 bar) process conditions required in treatment of pre-combustion and syngas process gas streams. Compared with neat PBI hollow fibers, filler incorporation into the polymer matrix leads to a strong increase in H2 permeance from 65 GPU to 107 GPU at 150 °C and 7 bar, while the ideal H2/CO2 selectivity remained constant at 18. For mixed gas permeation, there is competition between H2 and CO2 transport inside ZIF-8 structure. Adsorption of CO2 in the nanocavities of the filler suppresses the transport of the faster permeating H2 and consequently decreases the H2 permeance with total feed pressure down to values equal to the pure PBI hollow fibers for the end pressure of 30 bar. Therefore, the improvement of fiber performance for gas separation with filler addition is compromised at high operating feed pressures, which emphasizes the importance of membrane evaluation under relevant process conditions.