RT Journal Article
T1 Microstructure-properties relationship of AS9U3/SiCp composites formed by sand and permanent mold casting
A1 Goñi, J.
A1 Coleto, J.
A1 García, A.
A1 Palacios, J. K.
A1 Castro, M. C.
A1 Coupard, D.
A1 Arriaran, J.
AB The present work deals with the mechanical behaviour of a commercial AS9U3/SiCp composite formed by sand and permanent mold casting. The corresponding unreinforced matrix was also formed in the same conditions. As cast and heat treated (T6) tensile test specimens were machined and tested at room and 300° temperatures. The results showed a finer microstructure for both materials formed by permanent mold casting, with improved properties for the composite over those obtained for the unreinforced matrix, although this improvement was more clearly shown at 300°. The highest mechanical properties were obtained with the T6 heat treatment for both materials formed by permanent mold casting.
SN 1013-9826
YR 1997
FD 1997
LK https://hdl.handle.net/11556/4602
UL https://hdl.handle.net/11556/4602
LA eng
NO Goñi , J , Coleto , J , García , A , Palacios , J K , Castro , M C , Coupard , D & Arriaran , J 1997 , ' Microstructure-properties relationship of AS9U3/SiCp composites formed by sand and permanent mold casting ' , Key Engineering Materials , vol. 127-131 , pp. 487-494 .
DS TECNALIA Publications
RD 30 jul 2024