RT Journal Article
T1 Simplified Models for High Pressure Die Casting Simulation
A1 Anglada, Eva
A1 Meléndez, Antton
A1 Vicario, Iban
A1 Arratibel, Ernesto
A1 Cangas, Gaizka
AB The simulation of the High Pressure Die Casting (HPDC) process is a complex type of simulation. The industrial procedure is based on consecutive manufacturing cycles that must be taken into account in the simulation. Moreover the part geometries use to be complex and the alloy is injected at really high velocities. All of that usually implies long calculation times that in complex cases can lead to several days. Sometimes, the circumstances require to have available a fast solution despite involve a loss of accuracy. The work presented hereafter discusses different possibilities to simplify the HPDC simulation models together with their benefits and drawbacks. The simplified simulation models have been validated against a detailed 3D simulation model, previously correlated with experimental results. The comparative, shows that the use of simplified models may be a solution that makes possible a big reduction in calculation times maintaining a reasonable level of accuracy.
YR 2015
FD 2015
LA eng
NO Anglada , E , Meléndez , A , Vicario , I , Arratibel , E & Cangas , G 2015 , ' Simplified Models for High Pressure Die Casting Simulation ' , unknown , vol. unknown , pp. 974-981 . https://doi.org/10.1016/j.proeng.2015.12.585
NO Publisher Copyright: © 2015 The Authors. Published by Elsevier Ltd.
DS TECNALIA Publications
RD 29 jun 2024