RT Journal Article
T1 Thermal Energy Storage (TES) Prototype Based on Geopolymer Concrete for High-Temperature Applications
A1 Rahjoo, Mohammad
A1 Goracci, Guido
A1 Gaitero, Juan J.
A1 Martauz, Pavel
A1 Rojas, Esther
A1 Dolado, Jorge S.
AB Thermal energy storage (TES) systems are dependent on materials capable of operating at elevated temperatures for their performance and for prevailing as an integral part of industries. High-temperature TES assists in increasing the dispatchability of present power plants as well as increasing the efficiency in heat industry applications. Ordinary Portland cement (OPC)-based concretes are widely used as a sensible TES material in different applications. However, their performance is limited to operation temperatures below 400 °C due to the thermal degradation processes in its structure. In the present work, the performance and heat storage capacity of geopolymer-based concrete (GEO) have been studied experimentally and a comparison was carried out with OPC-based materials. Two thermal scenarios were examined, and results indicate that GEO withstand high running temperatures, higher than 500 °C, revealing higher thermal storage capacity than OPC-based materials. The high thermal energy storage, along with the high thermal diffusion coefficient at high temperatures, makes GEO a potential material that has good competitive properties compared with OPC-based TES. Experiments show the ability of geopolymer-based concrete for thermal energy storage applications, especially in industries that require feasible material for operation at high temperatures.
SN 1996-1944
YR 2022
FD 2022-10
LK https://hdl.handle.net/11556/3034
UL https://hdl.handle.net/11556/3034
LA eng
NO Rahjoo , M , Goracci , G , Gaitero , J J , Martauz , P , Rojas , E & Dolado , J S 2022 , ' Thermal Energy Storage (TES) Prototype Based on Geopolymer Concrete for High-Temperature Applications ' , Materials , vol. 15 , no. 20 , 7086 . https://doi.org/10.3390/ma15207086
NO Publisher Copyright: © 2022 by the authors.
NO This work was born under the umbrella of the project “Energy storage solutions based on concrete (E-CRETE)” (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018). Mohammad Rahjoo acknowledges the grant PRE2019-087676 funded by MCIN/AEI/10.13039/501100011033 and co-financed by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. In addition, the economic support from POVAZSKA is acknowledged. Jorge S. Dolado acknowledges the funding from the Gobierno Vasco UPV/EHU (project no. IT1569-22).
DS TECNALIA Publications
RD 30 jul 2024