RT Journal Article
T1 Modeling Innovative Power Take-Off Based on Double-Acting Hydraulic Cylinders Array for Wave Energy Conversion
A1 Antolín-Urbaneja, Juan Carlos
A1 Cortes, A.
A1 Cabanes, Itziar
A1 Estensoro, Patxi
A1 Lasa, Joseba
A1 Marcos, Marga
AB One of the key systems of a Wave Energy Converter for extraction of wave energy is the Power Take-Off (PTO) device. This device transforms the mechanical energy of a moving body into electrical energy. This paper describes the model of an innovative PTO based on independently activated double-acting hydraulic cylinders array. The model has been developed using a simulation tool, based on a port-based approach to model hydraulics systems. The components and subsystems used in the model have been parameterized as real components and their values experimentally obtained from an existing prototype. In fact, the model takes into account most of the hydraulic losses of each component. The simulations show the flexibility to apply different restraining torques to the input movement depending on the geometrical configuration and the hydraulic cylinders on duty, easily modified by a control law. The combination of these two actions allows suitable flexibility to adapt the device to different sea states whilst optimizing the energy extraction. The model has been validated using a real test bench showing good correlations between simulation and experimental tests
YR 2015
FD 2015-03-20
LA eng
NO Antolín-Urbaneja , J C , Cortes , A , Cabanes , I , Estensoro , P , Lasa , J & Marcos , M 2015 , ' Modeling Innovative Power Take-Off Based on Double-Acting Hydraulic Cylinders Array for Wave Energy Conversion ' , unknown , vol. unknown , no. 3 , pp. 2230-2267 . https://doi.org/10.3390/en8032230
NO Publisher Copyright: © 2015 by the author.
DS TECNALIA Publications
RD 22 jul 2024