%0 Journal Article
%A Soleimani, Manuchehr
%A Li, F
%A Spagnul, S
%A Palacios, J
%A Barbero, J
%A Gutierrez, T
%A Viotto, A
%T In-situ steel solidification imaging in continuous casting using magnetic induction tomography
%D 2020
%@ 0957-0233
%X : Solidification process in continuous casting is a critical part of steel production. The speed and quality of the solidification process determines the quality of final product. Computational fluid dynamics (CFD) simulations are often used to describe the process and design of its control system, but so far, there is no any tool that provides an on-line measurement of the solidification front of hot steel during the continuous casting process. This paper presents a new tool based on magnetic induction tomography (MIT) for real time monitoring of this process. The new MIT system was installed at the end of the secondary cooling chamber of a casting unit and tested during several days in a real production process. MIT is able to create an internal map of electrical conductivity of hot steel deep inside the billet. The image of electrical conductivity is then converted to temperature profile that allows the measurement of the solid, mushy and liquid layers. In this study, such a conversion is done by synchronizing in one time step the MIT measurement and the thermal map generated with the actual process parameters available at that time. The MIT results were then compared with the results obtained of the CFD and thermal modelling of the industrial process. This is the first in-situ monitoring of the interior structure during a real continuous casting.
%~