RT Conference Proceedings
T1 Insertion behavior study of multi-material self-piercing rivet joints by means of finite element simulation
A1 Varela, Sonia
A1 Mangas, Ángela
A1 Kotercova, Zuzana
A1 Briskham, Paul
A1 Giménez, María
A1 Muñoz, Carlos
A1 Molina, Ricardo
A1 Santos, Maite
A2 Arrazola, Pedro
A2 Saenz de Argandona, Eneko
A2 Otegi, Nagore
A2 Mendiguren, Joseba
A2 Saez de Buruaga, Mikel
A2 Madariaga, Aitor
A2 Galdos, Lander
AB Over the last few years, fuel economy improvement has driven the use of efficient multi-material structures in the car industry. The combination of dissimilar materials, such as metal-metal and metal-polymer, is a complex issue that requires the use of different and emerging joining techniques. In this context, self-pierce riveting (SPR) is an extremely suitable technique for joining two or more metal sheets, particularly when other techniques are not applicable. SPR requires short manufacturing times and provides both high strength and high fatigue resistance. Yet, this technique still faces some hurdles, such as joining Ultra High Strength Steels (UHSS) with high strength low ductility aluminum alloys, which can result in rivet cracking or aluminum button tearing. Suitable process parameters, including the rivet size and the die profile, are usually obtained through a physical testing procedure to satisfy the required joint specification. This is both expensive and time consuming. Finite element simulations of SPR are being increasingly used to reduce the number of physical tests and to estimate the tensile strength of the joint. The capability to accurately simulate aluminum to aluminum riveting has been demonstrated in recent studies. However, very few simulation studies have been conducted on the riveting of UHSS to aluminum, mainly because this type of joint is a relatively new customer demand driven by the rapid adoption of mixed material car body structures. New rivet designs have recently been developed for joining UHSS to aluminum, these rivets have increased column strength and increased stiffness to enable piercing through UHSS materials. In this study the insertion behavior of these higher strength rivets has been simulated and numerical analysis has been conducted to investigate the influence of the key process parameters on the joining result. The simulation results were compared to physical experimental results and good correlation was achieved.
PB American Institute of Physics Inc.
SN 9780735418479
YR 2019
FD 2019-07-02
LA eng
NO Varela , S , Mangas , Á , Kotercova , Z , Briskham , P , Giménez , M , Muñoz , C , Molina , R & Santos , M 2019 , Insertion behavior study of multi-material self-piercing rivet joints by means of finite element simulation . in P Arrazola , E Saenz de Argandona , N Otegi , J Mendiguren , M Saez de Buruaga , A Madariaga & L Galdos (eds) , unknown . vol. 2113 , 0094-243X , American Institute of Physics Inc. , pp. 50028 , 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 , Vitoria-Gasteiz , Spain , 8/05/19 . https://doi.org/10.1063/1.5112592
NO conference
NO Publisher Copyright: © 2019 Author(s).
DS TECNALIA Publications
RD 3 jul 2024