Improvement of the design process of matrix converter platforms using the switching state matrix averaging simulation method

Simple item page
dc.contributor.authorIbarra, Edorta
dc.contributor.authorKortabarria, Iñigo
dc.contributor.authorAndreu, Jon
dc.contributor.authorDe Alegría, Iñigo Martínez
dc.contributor.authorMartin, José Luis
dc.contributor.authorIbañez, Pedro
dc.contributor.institutionSG
dc.date.accessioned2024-07-24T12:12:11Z
dc.date.available2024-07-24T12:12:11Z
dc.date.issued2012-01
dc.description.abstractThe matrix converter (MC) is arousing considerable attention as an alternative for conventional ac/ac converters due to the advantages it offers. However, the control and modulation of this converter is complex. This, together with the fact that the MC usually operates at high modulation frequencies, makes the computational load of the platform to be simulated excessively high. All this makes the simulation time of models including the MC excessively long, even more so when both the transient and steady state of the system must be analyzed. This paper presents a new MC simulation technique called Switching State Matrix Averaging (SSMA). Although this is a fixed-step technique, a long simulation step can be used without forfeiting the accuracy of an ideal variable-step simulation. Likewise, the SSMA drastically speeds up the simulation, reducing the amount of required resources and the tuning time of the complex platforms in which the MC is used. A series of simulations has been performed in order to verify the proposed method. Moreover, a comparison between experimental and simulation results has been made, demonstrating the effectiveness of the proposed method.en
dc.description.sponsorshipManuscript received November 11, 2010; revised January 27, 2011; accepted March 5, 2011. Date of publication March 22, 2011; date of current version October 4, 2011. This work has been supported in part by the Department of Education, Universities and Research of the Basque Government within the fund for research groups of the Basque university system IT394-10, by the Ministerio de Educación y Ciencia of Spain within Project ENE2010-19187-C03-01/ALT, and by the University of the Basque Country.
dc.description.statusPeer reviewed
dc.format.extent15
dc.identifier.citationIbarra , E , Kortabarria , I , Andreu , J , De Alegría , I M , Martin , J L & Ibañez , P 2012 , ' Improvement of the design process of matrix converter platforms using the switching state matrix averaging simulation method ' , IEEE Transactions on Industrial Electronics , vol. 59 , no. 1 , 5735219 , pp. 220-234 . https://doi.org/10.1109/TIE.2011.2130504
dc.identifier.doi10.1109/TIE.2011.2130504
dc.identifier.issn0278-0046
dc.identifier.urihttps://hdl.handle.net/11556/4257
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=80053629041&partnerID=8YFLogxK
dc.language.isoeng
dc.relation.ispartofIEEE Transactions on Industrial Electronics
dc.relation.projectIDBasque university system, IT394-10
dc.relation.projectIDDepartment of Education, Universities and Research of the Basque Government
dc.relation.projectIDMinisterio de Educación Superior, Ciencia y Tecnología, República Dominicana, MESCYT, ENE2010-19187-C03-01/ALT
dc.relation.projectIDEuskal Herriko Unibertsitatea, EHU
dc.rightsinfo:eu-repo/semantics/restrictedAccess
dc.subject.keywordsMatrix converter (MC)
dc.subject.keywordsmodulation and control
dc.subject.keywordssimulation
dc.subject.keywordsSwitching State Matrix Averaging method
dc.subject.keywordsControl and Systems Engineering
dc.subject.keywordsElectrical and Electronic Engineering
dc.titleImprovement of the design process of matrix converter platforms using the switching state matrix averaging simulation methoden
dc.typejournal article
Files