Microstructure and wear behavior of DC-pulsed plasma nitrided AISI 316L austenitic stainless steel

Simple item page
dc.contributor.authorDe Las Heras, Evangelina
dc.contributor.authorSantamaria, Daniel González
dc.contributor.authorGarcía-Luis, Alberto
dc.contributor.authorCabo, Amado
dc.contributor.authorBrizuela, Marta
dc.contributor.authorYbarra, Gabriel
dc.contributor.authorMingolo, Norma
dc.contributor.authorBrühl, Sonia
dc.contributor.authorCorengia, Pablo
dc.contributor.institutionTECNOLOGÍAS DE HIDRÓGENO
dc.contributor.institutionINGENIERÍA DE SUPERFICIES
dc.contributor.institutionGENERAL
dc.date.accessioned2024-07-24T12:07:41Z
dc.date.available2024-07-24T12:07:41Z
dc.date.issued2007
dc.description.abstractAustenitic stainless steel are used in industrial applications, mainly due to their good corrosion resistance; however, their low hardness and poor wear performance impose strong limitations in many cases. In this work, the wear behavior of the unnitrided and DC-pulsed plasma nitrided AISI 316L stainless steel has been investigated using an Amsler-Disc-Machine under rolling-sliding contact conditions. The microstructure was studied by X-ray diffraction and the worn surface, subsurface, and wear debris were analyzed by optical microscopy, scanning electron microscopy, and microhardness testing. The obtained results show that pulsed plasma nitriding improves the wear resistance of the AISI 316L and different wear mechanisms were observed depending on the normal applied load.en
dc.description.statusPeer reviewed
dc.identifier.citationDe Las Heras , E , Santamaria , D G , García-Luis , A , Cabo , A , Brizuela , M , Ybarra , G , Mingolo , N , Brühl , S & Corengia , P 2007 , ' Microstructure and wear behavior of DC-pulsed plasma nitrided AISI 316L austenitic stainless steel ' , Plasma Processes and Polymers , vol. 4 , no. SUPPL.1 , pp. S741-S745 . https://doi.org/10.1002/ppap.200731809
dc.identifier.doi10.1002/ppap.200731809
dc.identifier.issn1612-8850
dc.identifier.urihttps://hdl.handle.net/11556/3795
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=44249084126&partnerID=8YFLogxK
dc.language.isoeng
dc.relation.ispartofPlasma Processes and Polymers
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subject.keywordsAustenitic stainless steel
dc.subject.keywordsHardness
dc.subject.keywordsMicrostructure
dc.subject.keywordsPlasma treatment
dc.subject.keywordsWear
dc.subject.keywordsCondensed Matter Physics
dc.subject.keywordsPolymers and Plastics
dc.titleMicrostructure and wear behavior of DC-pulsed plasma nitrided AISI 316L austenitic stainless steelen
dc.typejournal article
Files