Model for the Prediction of Deformations in the Manufacture of Thin-Walled Parts by Wire Arc Additive Manufacturing Technology

Simple item page
dc.contributor.authorCasuso, Mikel
dc.contributor.authorVeiga, Fernando
dc.contributor.authorSuárez, Alfredo
dc.contributor.authorBhujangrao, Trunal
dc.contributor.authorAldalur, Eider
dc.contributor.authorArtaza, Teresa
dc.contributor.authorAmondarain, Jaime
dc.contributor.authorLamikiz, Aitzol
dc.contributor.institutionFABRIC_INTEL
dc.contributor.institutionTecnalia Research & Innovation
dc.date.issued2021-04-21
dc.descriptionPublisher Copyright: © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
dc.description.abstractGas Metal Arc Welding (GMAW) is a manufacturing technology included within the differentWire Arc Additive Manufacturing alternatives. These technologies have been generating great attention among scientists in recent decades. Its main qualities that make it highly productive with a large use of material with relatively inexpensive machine solutions make it a very advantageous technology. This paper covers the application of this technology for the manufacture of thin-walled parts. A finite element model is presented for estimating the deformations in this type of parts. This paper presents a simulation model that predicts temperatures with less than 5% error and deformations of the final part that, although quantitatively has errors of 20%, qualitatively allows to know the deformation modes of the part. Knowing the part areas subject to greater deformation may allow the future adaptation of deposition strategies or redesigns for their adaptation. These models are very useful both at a scientific and industrial level since when we find ourselves with a technology oriented to Near Net Shape (NNS) manufacturing where deformations are critical for obtaining the final part in a quality regime.en
dc.description.statusPeer reviewed
dc.format.extent1
dc.format.extent3027694
dc.identifier.citationCasuso , M , Veiga , F , Suárez , A , Bhujangrao , T , Aldalur , E , Artaza , T , Amondarain , J & Lamikiz , A 2021 , ' Model for the Prediction of Deformations in the Manufacture of Thin-Walled Parts by Wire Arc Additive Manufacturing Technology ' , Metals , vol. 11 , no. 5 , 678 , pp. 678 . https://doi.org/10.3390/met11050678
dc.identifier.doi10.3390/met11050678
dc.identifier.issn2075-4701
dc.identifier.otherresearchoutputwizard: 11556/1127
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=85104478607&partnerID=8YFLogxK
dc.language.isoeng
dc.relation.ispartofMetals
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subject.keywordsThin wall manufacturing
dc.subject.keywordsAdditive manufacturing
dc.subject.keywordsProcess modelling
dc.subject.keywordsThin wall manufacturing
dc.subject.keywordsAdditive manufacturing
dc.subject.keywordsProcess modelling
dc.subject.keywordsGeneral Materials Science
dc.subject.keywordsMetals and Alloys
dc.subject.keywordsSDG 9 - Industry, Innovation, and Infrastructure
dc.subject.keywordsFunding Info
dc.subject.keywordsThis research was funded by the vice-counseling of technology, innovation and competitiveness of the Basque Government grant agreement kk-2019/00004 (PROCODA project) and the QUALYFAM project, through the ELKARTEK 2020 (KK-2020/00042) and the ADIFIX project funded by HAZITEK 2019 and 2020 (ZL-2019/00738, ZL-2020/00073) programs and the Spanish Government CDTI-Red Cervera Programme (EXP 00123730/IDI-20191162).
dc.subject.keywordsThis research was funded by the vice-counseling of technology, innovation and competitiveness of the Basque Government grant agreement kk-2019/00004 (PROCODA project) and the QUALYFAM project, through the ELKARTEK 2020 (KK-2020/00042) and the ADIFIX project funded by HAZITEK 2019 and 2020 (ZL-2019/00738, ZL-2020/00073) programs and the Spanish Government CDTI-Red Cervera Programme (EXP 00123730/IDI-20191162).
dc.titleModel for the Prediction of Deformations in the Manufacture of Thin-Walled Parts by Wire Arc Additive Manufacturing Technologyen
dc.typejournal article
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
metals-11-00678.pdf
Size:
2.89 MB
Format:
Adobe Portable Document Format
Download