Mathematical development of an average method for estimating the reduction of the Heat Loss Coefficient of an energetically retrofitted occupied office building

dc.contributor.authorUriarte, Irati
dc.contributor.authorErkoreka, Aitor
dc.contributor.authorGiraldo-Soto, Catalina
dc.contributor.authorMartin, Koldo
dc.contributor.authorUriarte, Amaia
dc.contributor.authorEguia, Pablo
dc.contributor.institutionEDIFICACIÓN DE ENERGÍA POSITIVA
dc.contributor.institutionTecnalia Research & Innovation
dc.date.issued2019-06-01
dc.descriptionPublisher Copyright: © 2019 Elsevier B.V.
dc.description.abstractThe performance gap between the design energy consumption of buildings and their real energy consumption has three main sources: the energy systems’ performance, the users’ behaviour and the buildings’ envelope performance. The latter should be characterized under in-use conditions by estimating their in-use Heat Loss Coefficient (HLC). This work further develops an existing ‘average method’ by fully developing it from the energy conservation principle applied to a generic in-use building. Furthermore, the uncertainty sources are identified and limited through the mathematical development of the method. An innovative solution to the problematic of multizone buildings is also demonstrated, where HLC values should be calculated for different floors and then aggregated to obtain the entire building's HLC. Furthermore, all these can be done without the need of a detailed model of the building. The improved average method has been applied to an occupied, energetically monitored office building of the University of the Basque Country. The building was energetically rehabilitated during the summer of 2017. Therefore, the proposed method has been applied over the three winters prior to rehabilitation and then, to the winter after the rehabilitation. It has thus been possible to estimate a 28% reduction of the HLC for the post-retrofitted case, as compared to the pre-retrofitted one.en
dc.description.sponsorshipThis work was supported by the Spanish Economy and Competitiveness Ministry and the European Regional Development Fund (grant numbers ENE2015-65999-C2-2-R and ENE2015-65999-C2-1-R ) through the IMMOEN project ‘Implementation of automated calibration and multiobjective optimization techniques applied to Building Energy Model simulations by means of monitored buildings’, project reference: ENE2015-65999-C2-2-R and ENE2015-65999-C2-1-R (MINECO/FEDER); by the European Commission through the A2PBEER project ‘Affordable and Adaptable Public Buildings through Energy Efficient Retrofitting’, Grant agreement no: 609060 ; by the University of the Basque Country (UPV/EHU) by providing funding and the studied in-use office building. The corresponding author also acknowledges the support provided by the Education Department of the Basque Government (grant number PRE_2017_1_0122 ) through a scholarship granted to her to complete her PhD degree. This work was supported by the Spanish Economy and Competitiveness Ministry and the European Regional Development Fund (grant numbers ENE2015-65999-C2-2-R and ENE2015-65999-C2-1-R) through the IMMOEN project ‘Implementation of automated calibration and multiobjective optimization techniques applied to Building Energy Model simulations by means of monitored buildings’ project reference: ENE2015-65999-C2-2-R and ENE2015-65999-C2-1-R (MINECO/FEDER); by the European Commission through the A2PBEER project ‘Affordable and Adaptable Public Buildings through Energy Efficient Retrofitting’ Grant agreement no: 609060; by the University of the Basque Country (UPV/EHU) by providing funding and the studied in-use office building. The corresponding author also acknowledges the support provided by the Education Department of the Basque Government (grant number PRE_2017_1_0122) through a scholarship granted to her to complete her PhD degree. None.
dc.description.statusPeer reviewed
dc.format.extent22
dc.identifier.citationUriarte , I , Erkoreka , A , Giraldo-Soto , C , Martin , K , Uriarte , A & Eguia , P 2019 , ' Mathematical development of an average method for estimating the reduction of the Heat Loss Coefficient of an energetically retrofitted occupied office building ' , Energy and Buildings , vol. 192 , pp. 101-122 . https://doi.org/10.1016/j.enbuild.2019.03.006
dc.identifier.doi10.1016/j.enbuild.2019.03.006
dc.identifier.issn0378-7788
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=85063401908&partnerID=8YFLogxK
dc.language.isoeng
dc.relation.ispartofEnergy and Buildings
dc.relation.projectIDEducation Department of the Basque Government, PRE_2017_1_0122
dc.relation.projectIDMINECO/FEDER
dc.relation.projectIDSpanish Economy and Competitiveness Ministry
dc.relation.projectIDEuropean Commission, EC
dc.relation.projectIDEusko Jaurlaritza
dc.relation.projectIDEuskal Herriko Unibertsitatea, EHU
dc.relation.projectIDEuropean Regional Development Fund, FEDER, 609060-ENE2015-65999-C2-1-R
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subject.keywordsAverage method
dc.subject.keywordsBuilding envelope energy performance
dc.subject.keywordsEnergy monitoring
dc.subject.keywordsHeat Loss Coefficient (HLC)
dc.subject.keywordsCivil and Structural Engineering
dc.subject.keywordsBuilding and Construction
dc.subject.keywordsMechanical Engineering
dc.subject.keywordsElectrical and Electronic Engineering
dc.titleMathematical development of an average method for estimating the reduction of the Heat Loss Coefficient of an energetically retrofitted occupied office buildingen
dc.typejournal article
Files