Development of the ERS process for the fabrication of titanium components

Simple item page
dc.contributor.authorLagos, M. A.
dc.contributor.authorAgote, I.
dc.contributor.authorVicente, A.
dc.contributor.authorAmigó, V.
dc.contributor.authorLópez, D.
dc.contributor.authorCalero, J. A.
dc.contributor.institutionEXTREMAT
dc.date.accessioned2024-07-24T11:53:34Z
dc.date.available2024-07-24T11:53:34Z
dc.date.issued2020
dc.descriptionPublisher Copyright: © European Powder Metallurgy Association (EPMA).
dc.description.abstractElectric Resistance Sintering (ERS) is a low-cost alternative to Spark Plasma Sintering (SPS). In the developed process the duration of the cycles is very short (seconds) and without protective atmosphere. These features allow an easy industrialization of the process. This paper shows the processing of different titanium alloys by ERS and the effect of the type of powder and composition in the densification of the alloys. The characterization of the products includes the microstructural analysis, EBSD, crystallographic phases by XRD, elastic modulus and bending strength. In addition, oxygen content of the obtained materials was analyzed in detail considering the parameters of the process. It was possible to obtain full densification of the compacts and mechanical properties show interesting results.en
dc.description.statusPeer reviewed
dc.identifier.citationLagos , M A , Agote , I , Vicente , A , Amigó , V , López , D & Calero , J A 2020 , Development of the ERS process for the fabrication of titanium components . in Euro PM 2018 Congress and Exhibition . Euro PM 2018 Congress and Exhibition , European Powder Metallurgy Association (EPMA) , European Powder Metallurgy Congress and Exhibition, Euro PM 2018 , Bilbao , Spain , 14/10/18 .
dc.identifier.citationconference
dc.identifier.isbn9781899072507
dc.identifier.urihttps://hdl.handle.net/11556/2313
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=85084161324&partnerID=8YFLogxK
dc.language.isoeng
dc.publisherEuropean Powder Metallurgy Association (EPMA)
dc.relation.ispartofEuro PM 2018 Congress and Exhibition
dc.relation.ispartofseriesEuro PM 2018 Congress and Exhibition
dc.rightsinfo:eu-repo/semantics/restrictedAccess
dc.subject.keywordsEBSD
dc.subject.keywordsElectric Resistance Sintering
dc.subject.keywordsMicrostructure
dc.subject.keywordsTitanium alloys
dc.subject.keywordsMetals and Alloys
dc.subject.keywordsSurfaces, Coatings and Films
dc.subject.keywordsSurfaces and Interfaces
dc.titleDevelopment of the ERS process for the fabrication of titanium componentsen
dc.typeconference output
Files