Characterization of Inconel 718® superalloy fabricated by wire Arc Additive Manufacturing: effect on mechanical properties and machinability: effect on mechanical properties and machinability
dc.contributor.author | Alonso, Unai | |
dc.contributor.author | Veiga, Fernando | |
dc.contributor.author | Suárez, Alfredo | |
dc.contributor.author | Gil Del Val, Alain | |
dc.contributor.institution | Tecnalia Research & Innovation | |
dc.contributor.institution | FABRIC_INTEL | |
dc.date.issued | 2021-09 | |
dc.description | Publisher Copyright: © 2021 The Author(s) | |
dc.description.abstract | Wire and Arc Additive Manufacturing has the potential to become an appropriate technique to produce large complex-shaped metallic parts. However, a post-processing machining operation is necessary to reach the final geometry. In this work, Inconel 718 walls were manufactured in a monitored environment and their microstructure and mechanical properties were characterised. Then, slot milling operations were performed to investigate the influence of cutting speed and machining direction. The conclusions drawn from this article can be used as a guide for a correct definition of strategies and milling parameters. It was observed that at higher cutting speeds a better surface quality and lower torques are obtained. Moreover, the main novelty of this work is that is shows the influence of the anisotropy of WAAM-Inconel 718 on its machinability. Milling along the torch's travel direction offers better dimensional tolerance values with lower cutting torques, being more favourable than machining in the building direction. | en |
dc.description.status | Peer reviewed | |
dc.format.extent | 12 | |
dc.format.extent | 3482152 | |
dc.identifier.citation | Alonso , U , Veiga , F , Suárez , A & Gil Del Val , A 2021 , ' Characterization of Inconel 718® superalloy fabricated by wire Arc Additive Manufacturing: effect on mechanical properties and machinability : effect on mechanical properties and machinability ' , Journal of Materials Research and Technology , vol. 14 , pp. 2665-2676 . https://doi.org/10.1016/j.jmrt.2021.07.132 | |
dc.identifier.doi | 10.1016/j.jmrt.2021.07.132 | |
dc.identifier.issn | 2238-7854 | |
dc.identifier.other | researchoutputwizard: 11556/1181 | |
dc.identifier.url | http://www.scopus.com/inward/record.url?scp=85112507402&partnerID=8YFLogxK | |
dc.language.iso | eng | |
dc.relation.ispartof | Journal of Materials Research and Technology | |
dc.rights | info:eu-repo/semantics/openAccess | |
dc.subject.keywords | WAAM | |
dc.subject.keywords | Inconel 718 | |
dc.subject.keywords | Microstructure | |
dc.subject.keywords | Machinability | |
dc.subject.keywords | Bending moment | |
dc.subject.keywords | WAAM | |
dc.subject.keywords | Inconel 718 | |
dc.subject.keywords | Microstructure | |
dc.subject.keywords | Machinability | |
dc.subject.keywords | Bending moment | |
dc.subject.keywords | Ceramics and Composites | |
dc.subject.keywords | Biomaterials | |
dc.subject.keywords | Surfaces, Coatings and Films | |
dc.subject.keywords | Metals and Alloys | |
dc.subject.keywords | SDG 9 - Industry, Innovation, and Infrastructure | |
dc.subject.keywords | Funding Info | |
dc.subject.keywords | The authors acknowledge the Basque Government for financing the HARIPLUS, HAZITEK 2019 program (ZL-2019/00352) and QUALYFAM project [kk-2020/00042]. The authors are also thankful to the Basque government for supporting the Basque university group on Advanced manufacturing ref: IT1337-19. | |
dc.subject.keywords | The authors acknowledge the Basque Government for financing the HARIPLUS, HAZITEK 2019 program (ZL-2019/00352) and QUALYFAM project [kk-2020/00042]. The authors are also thankful to the Basque government for supporting the Basque university group on Advanced manufacturing ref: IT1337-19. | |
dc.title | Characterization of Inconel 718® superalloy fabricated by wire Arc Additive Manufacturing: effect on mechanical properties and machinability: effect on mechanical properties and machinability | en |
dc.type | journal article |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- 1-s2.0-S2238785421007912-main.pdf
- Size:
- 3.32 MB
- Format:
- Adobe Portable Document Format