Kerf profile modelling in Abrasive Waterjet milling

Simple item page
dc.contributor.authorAlberdi, A.
dc.contributor.authorRivero, A.
dc.contributor.authorCarrascal, A.
dc.contributor.authorLamikiz, A.
dc.contributor.institutionFABRIC_INTEL
dc.contributor.institutionSG
dc.date.accessioned2024-07-24T11:54:19Z
dc.date.available2024-07-24T11:54:19Z
dc.date.issued2012
dc.description.abstractThe Abrasive Water Jet milling process is demonstrated to be an efficient technology for milling low machinability materials. Although its capability is demonstrated, the industrial application of this technology requires a depth control, for which a work focused in process modelling is needed. This research work introduces a model to predict the kerf shape in AWJ slot milling in Aluminium 7075-T651 in terms of four important process parameters: pressure, abrasive mass flow rate, stand-off distance and traverse feed rate. A hybrid evolutionary approach was employed for modelling the profile through two parameters: the maximum cutting depth and the full width at half maximum. Both the maximum depth and the width were also modelled as a function of aforementioned process parameters based on Analysis of Variance and regression techniques. Combination of two models resulted in an adequate strategy to predict the kerf shape for different machining conditions.en
dc.description.statusPeer reviewed
dc.format.extent6
dc.identifier.citationAlberdi , A , Rivero , A , Carrascal , A & Lamikiz , A 2012 , Kerf profile modelling in Abrasive Waterjet milling . in Advances in Non Conventional Materials Processing Technologies . Materials Science Forum , vol. 713 , Trans Tech Publications Ltd , pp. 91-96 , 4th Manufacturing Engineering Society International Conference, MESIC 2011 , Cadiz , Spain , 21/09/11 . https://doi.org/10.4028/www.scientific.net/MSF.713.91
dc.identifier.citationconference
dc.identifier.doi10.4028/www.scientific.net/MSF.713.91
dc.identifier.isbn9783037853573
dc.identifier.issn0255-5476
dc.identifier.urihttps://hdl.handle.net/11556/2391
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=84859094243&partnerID=8YFLogxK
dc.language.isoeng
dc.publisherTrans Tech Publications Ltd
dc.relation.ispartofAdvances in Non Conventional Materials Processing Technologies
dc.relation.ispartofseriesMaterials Science Forum
dc.rightsinfo:eu-repo/semantics/restrictedAccess
dc.subject.keywordsAbrasive Waterjet
dc.subject.keywordsANOVA
dc.subject.keywordsEvolutionary Computation
dc.subject.keywordsMilling
dc.subject.keywordsModelling
dc.subject.keywordsGeneral Materials Science
dc.subject.keywordsCondensed Matter Physics
dc.subject.keywordsMechanics of Materials
dc.subject.keywordsMechanical Engineering
dc.titleKerf profile modelling in Abrasive Waterjet millingen
dc.typeconference output
Files