Structural and magnetic properties of sintered Sr-ferrites fabricated by powder injection molding
dc.contributor.author | Murillo, N. | |
dc.contributor.author | González, J. | |
dc.contributor.author | Guraya, C. | |
dc.contributor.author | Gutiérrez, M. | |
dc.contributor.author | Seco, F. J. | |
dc.contributor.institution | EXTREMAT | |
dc.contributor.institution | Tecnalia Research & Innovation | |
dc.date.issued | 1999-08 | |
dc.description.abstract | Studies of micro structure (SEM and metalographic micrographs) and magnetic properties (remanent magnetisation and coercive field) have been performed on bipolar sintered Sr-ferrite permanent magnets obtained by powder injection molding (PIM) method under applied magnetic field in order to align the magnetic particles during the PIM process. Magnetic measurements on the samples were made in the parallel and perpendicular direction of the aligning magnetic field. The remanence in the direction of alignment increased sharply with the alignment field to a maximum value of 3840 Gs while the coercivity decreases to a minimum value of 3220 Oe. | en |
dc.description.sponsorship | The authors wish to thank the funding support received from the SPRI agency of the Basque Government to project CO97CP01. | |
dc.description.status | Peer reviewed | |
dc.format.extent | 4 | |
dc.identifier.citation | Murillo , N , González , J , Guraya , C , Gutiérrez , M & Seco , F J 1999 , ' Structural and magnetic properties of sintered Sr-ferrites fabricated by powder injection molding ' , Journal of Magnetism and Magnetic Materials , vol. 203 , no. 1-3 , pp. 165-168 . https://doi.org/10.1016/S0304-8853(99)00251-6 | |
dc.identifier.doi | 10.1016/S0304-8853(99)00251-6 | |
dc.identifier.issn | 0304-8853 | |
dc.identifier.url | http://www.scopus.com/inward/record.url?scp=0032599210&partnerID=8YFLogxK | |
dc.language.iso | eng | |
dc.relation.ispartof | Journal of Magnetism and Magnetic Materials | |
dc.relation.projectID | Eusko Jaurlaritza, CO97CP01 | |
dc.rights | info:eu-repo/semantics/restrictedAccess | |
dc.subject.keywords | Ferrites | |
dc.subject.keywords | Powder injection molding | |
dc.subject.keywords | Electronic, Optical and Magnetic Materials | |
dc.subject.keywords | Condensed Matter Physics | |
dc.title | Structural and magnetic properties of sintered Sr-ferrites fabricated by powder injection molding | en |
dc.type | journal article |