Three-Dimensional Finite Element Modelling of Sheet Metal Forming for the Manufacture of Pipe Components: Symmetry Considerations: Symmetry Considerations
dc.contributor.author | Bhujangrao, Trunal | |
dc.contributor.author | Veiga, Fernando | |
dc.contributor.author | Penalva, Mariluz | |
dc.contributor.author | Costas, Adriana | |
dc.contributor.author | Ruiz, Cristina | |
dc.contributor.institution | Tecnalia Research & Innovation | |
dc.contributor.institution | FABRIC_INTEL | |
dc.date.issued | 2022-01-25 | |
dc.description | Publisher Copyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland. | |
dc.description.abstract | The manufacture of parts by metal forming is a widespread technique in sectors such as oil and gas and automotives. It is therefore important to make a research effort to know the correct set of parameters that allow the manufacture of correct parts. This paper presents a process analysis by means of the finite element model. The use case presented in this paper is that of a 3-m diameter pipe component with a thickness of 22 mm. In this type of application, poor selection of process conditions can result in parts that are out of tolerance, both in dimensions and shape. A 3D finite element model is made, and the symmetry of the tube section generated in 2D is analysed. As a novelty, an analysis of the process correction as a function of the symmetrical deformation of the material in this case in the form of a pipe is carried out. The results show a correct fitting of the model and give guidelines for manufacturing. | en |
dc.description.status | Peer reviewed | |
dc.format.extent | 1 | |
dc.format.extent | 6275726 | |
dc.identifier.citation | Bhujangrao , T , Veiga , F , Penalva , M , Costas , A & Ruiz , C 2022 , ' Three-Dimensional Finite Element Modelling of Sheet Metal Forming for the Manufacture of Pipe Components: Symmetry Considerations : Symmetry Considerations ' , Symmetry , vol. 14 , no. 2 , 228 , pp. 228 . https://doi.org/10.3390/sym14020228 | |
dc.identifier.doi | 10.3390/sym14020228 | |
dc.identifier.issn | 2073-8994 | |
dc.identifier.other | researchoutputwizard: 11556/1291 | |
dc.identifier.url | http://www.scopus.com/inward/record.url?scp=85124082065&partnerID=8YFLogxK | |
dc.language.iso | eng | |
dc.relation.ispartof | Symmetry | |
dc.rights | info:eu-repo/semantics/openAccess | |
dc.subject.keywords | Finite element modelling | |
dc.subject.keywords | Symmetry assessments | |
dc.subject.keywords | Steel | |
dc.subject.keywords | Material deformation | |
dc.subject.keywords | Finite element modelling | |
dc.subject.keywords | Symmetry assessments | |
dc.subject.keywords | Steel | |
dc.subject.keywords | Material deformation | |
dc.subject.keywords | Sheet metal forming | |
dc.subject.keywords | Computer Science (miscellaneous) | |
dc.subject.keywords | Chemistry (miscellaneous) | |
dc.subject.keywords | General Mathematics | |
dc.subject.keywords | Physics and Astronomy (miscellaneous) | |
dc.subject.keywords | Project ID | |
dc.subject.keywords | info:eu-repo/grantAgreement/EC/H2020/958303/EU/Closed-loop digital pipeline for a flexible and modular manufacturing of large components/PENELOPE | |
dc.subject.keywords | info:eu-repo/grantAgreement/EC/H2020/958303/EU/Closed-loop digital pipeline for a flexible and modular manufacturing of large components/PENELOPE | |
dc.subject.keywords | Funding Info | |
dc.subject.keywords | The authors acknowledge the funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 958303. | |
dc.subject.keywords | The authors acknowledge the funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 958303. | |
dc.title | Three-Dimensional Finite Element Modelling of Sheet Metal Forming for the Manufacture of Pipe Components: Symmetry Considerations: Symmetry Considerations | en |
dc.type | journal article |
Files
Original bundle
1 - 1 of 1