Application of standardization for the design and construction of carbon nanotube-based product pilot lines in compliance with EU regulation on machinery

Simple item page
dc.contributor.authorLópez de Ipiña, Jesús M
dc.contributor.authorFlorez, Sonia
dc.contributor.authorSeddon, Richard
dc.contributor.authorChapartegui, Maialen
dc.contributor.authorHernan, Angel
dc.contributor.authorInsunza, Mario
dc.contributor.authorVavouliotis, Antonios
dc.contributor.authorKoutsoukis, Gregorios
dc.contributor.authorLatko-Durałek, Paulina
dc.contributor.authorDurałek, Paweł
dc.contributor.authorPerez, Pilar
dc.contributor.authorGutierrez-Cañas, Cristina
dc.contributor.institutionTecnalia Research & Innovation
dc.contributor.institutionSMART_MON
dc.contributor.institutionPOLIMEROS
dc.date.issued2019-10-17
dc.descriptionPublisher Copyright: © 2019 Published under licence by IOP Publishing Ltd.
dc.description.abstractThe "PLATFORM" manufacturing ecosystem for pilot production of pre-commercial CNT-based nano-enabled products, consists of three pilot lines (PPLs) for the manufacture of buckypapers, doped prepregs and doped veils. The PPLs have been constructed with the ultimate goal to commercialize these products in the European market in 2020/2022.This goal requires having the PPLs in compliance with the applicable product safety regulation by that date (CE marking). The main EU regulation for new machinery (as the PPLs) is the Directive 2006/42/EC on Machinery (MD). This Directive sets out the general mandatory Essential Health and Safety Requirements (EHSRs) related to the design and construction of machinery, while particular technical specifications for fulfilling them are provided in European harmonized standards. Application of harmonized standards is voluntary but confers a presumption of conformity with the EHSRs they cover. The PPLs are unique machines for own use and must comply with the MD before they are put into service, in 2020/2022. But the MD does not provide specific EHSRs for nanosafety and no harmonized standards are available in this field for the safe design of the PPLs. In this context, this paper shows the standardization strategy followed by the project PLATFORM (GA 646307) to design the PPLs in compliance with the EHSR referred to the risks to health resulting from hazardous substances emitted by machinery (MD, Annex I, EHSR 1.5.13). In the absence of nanosafety harmonized standards to satisfy the aforementioned EHSR, the design and design verification of the PPLs were carried out through A & B - type harmonized standards (e.g. EN ISO 12100, EN ISO 14123-1/2), and other European and international standards.en
dc.description.statusPeer reviewed
dc.format.extent1
dc.format.extent662543
dc.identifier.citationLópez de Ipiña , J M , Florez , S , Seddon , R , Chapartegui , M , Hernan , A , Insunza , M , Vavouliotis , A , Koutsoukis , G , Latko-Durałek , P , Durałek , P , Perez , P & Gutierrez-Cañas , C 2019 , ' Application of standardization for the design and construction of carbon nanotube-based product pilot lines in compliance with EU regulation on machinery ' , Journal of Physics: Conference Series , vol. 1323 , no. 1 , 012024 , pp. 12024 . https://doi.org/10.1088/1742-6596/1323/1/012024
dc.identifier.doi10.1088/1742-6596/1323/1/012024
dc.identifier.issn1742-6588
dc.identifier.otherresearchoutputwizard: 11556/822
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=85074952508&partnerID=8YFLogxK
dc.language.isoeng
dc.relation.ispartofJournal of Physics: Conference Series
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subject.keywordsCarbon nanotubes
dc.subject.keywordsHealth
dc.subject.keywordsHealth risks
dc.subject.keywordsMachinery
dc.subject.keywordsManufacture
dc.subject.keywordsPilot plants
dc.subject.keywordsProduct design
dc.subject.keywordsStandardization
dc.subject.keywordsCarbon nanotubes
dc.subject.keywordsHealth
dc.subject.keywordsHealth risks
dc.subject.keywordsMachinery
dc.subject.keywordsManufacture
dc.subject.keywordsPilot plants
dc.subject.keywordsProduct design
dc.subject.keywordsStandardization
dc.subject.keywordsGeneral Physics and Astronomy
dc.subject.keywordsSDG 3 - Good Health and Well-being
dc.subject.keywordsSDG 9 - Industry, Innovation, and Infrastructure
dc.subject.keywordsSDG 7 - Affordable and Clean Energy
dc.subject.keywordsSDG 12 - Responsible Consumption and Production
dc.subject.keywordsProject ID
dc.subject.keywordsinfo:eu-repo/grantAgreement/EC/H2020/646307/EU/Open access pilot plants for sustainable industrial scale nanocomposites manufacturing based on buckypapers, doped veils and prepregs/PLATFORM
dc.subject.keywordsinfo:eu-repo/grantAgreement/EC/H2020/814581/EU/Open Access Single entry point for scale-up of Innovative Smart lightweight composite materials and components/OASIS
dc.subject.keywordsinfo:eu-repo/grantAgreement/EC/H2020/646307/EU/Open access pilot plants for sustainable industrial scale nanocomposites manufacturing based on buckypapers, doped veils and prepregs/PLATFORM
dc.subject.keywordsinfo:eu-repo/grantAgreement/EC/H2020/814581/EU/Open Access Single entry point for scale-up of Innovative Smart lightweight composite materials and components/OASIS
dc.subject.keywordsFunding Info
dc.subject.keywordsThe projects PLATFORM and OASIS have received funding from the European Union’s Horizon 2020_x000D_ research and innovation programme, under grant agreements Nº 646307 and Nº 814581, respectively._x000D_ This paper reflects only the authors’ views, and the Commission is not responsible for any use that may_x000D_ be made of the information contained therein.
dc.subject.keywordsThe projects PLATFORM and OASIS have received funding from the European Union’s Horizon 2020_x000D_ research and innovation programme, under grant agreements Nº 646307 and Nº 814581, respectively._x000D_ This paper reflects only the authors’ views, and the Commission is not responsible for any use that may_x000D_ be made of the information contained therein.
dc.titleApplication of standardization for the design and construction of carbon nanotube-based product pilot lines in compliance with EU regulation on machineryen
dc.typeconference output
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Application of.pdf
Size:
647.01 KB
Format:
Adobe Portable Document Format
Download