Monitoring of thread quality when tapping nodular cast iron with TiN-coated HSS cutting taps

Simple item page
dc.contributor.authorGil Del Val, A.
dc.contributor.authorFernández, J.
dc.contributor.authorDel Castillo, E.
dc.contributor.authorArizmendi, M.
dc.contributor.authorVeiga, F.
dc.contributor.institutionTecnalia Research & Innovation
dc.date.accessioned2024-07-24T12:03:20Z
dc.date.available2024-07-24T12:03:20Z
dc.date.issued2013-11
dc.description.abstractTapping is a widely employed but complex manufacturing process in which a multi-toothed tool, known as a tap, cuts a mating thread when driven into a hole. In this paper, the experiments, statistical analysis and the on-line implementation of a new thread quality monitoring system are presented for a tapping process in high-speed conditions. A multivariate statistical process control chart, for each tap, is presented based on the principal components of the torque directly measured from spindle motor drive. The on-line implementation of the multivariate chart provides tap wear warnings and alarms before the process starts producing unacceptable screw threads. The system is cost-effective since the tapping process can be run automatically without any operator intervention, does not require intrusive sensors, does not result in false negatives (defects) and provides an acceptable number of false positives.en
dc.description.statusPeer reviewed
dc.format.extent10
dc.identifier.citationGil Del Val , A , Fernández , J , Del Castillo , E , Arizmendi , M & Veiga , F 2013 , ' Monitoring of thread quality when tapping nodular cast iron with TiN-coated HSS cutting taps ' , International Journal of Advanced Manufacturing Technology , vol. 69 , no. 5-8 , pp. 1273-1282 . https://doi.org/10.1007/s00170-013-5078-7
dc.identifier.doi10.1007/s00170-013-5078-7
dc.identifier.issn0268-3768
dc.identifier.urihttps://hdl.handle.net/11556/3341
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=84887619205&partnerID=8YFLogxK
dc.language.isoeng
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technology
dc.rightsinfo:eu-repo/semantics/restrictedAccess
dc.subject.keywordsDiagnosis
dc.subject.keywordsHSC
dc.subject.keywordsMonitoring
dc.subject.keywordsPCA
dc.subject.keywordsQuality
dc.subject.keywordsSPC
dc.subject.keywordsTapping
dc.subject.keywordsControl and Systems Engineering
dc.subject.keywordsSoftware
dc.subject.keywordsMechanical Engineering
dc.subject.keywordsComputer Science Applications
dc.subject.keywordsIndustrial and Manufacturing Engineering
dc.subject.keywordsSDG 9 - Industry, Innovation, and Infrastructure
dc.titleMonitoring of thread quality when tapping nodular cast iron with TiN-coated HSS cutting tapsen
dc.typejournal article
Files