Influence of the processing parameters on glass mat reinforced thermoplastic (GMT) stamping

Simple item page
dc.contributor.authorRubio, A.
dc.contributor.authorEguizabal, P.
dc.contributor.authorMendizabal, M. A.
dc.contributor.authorLiceaga, J. F.
dc.contributor.institutionTecnalia Research & Innovation
dc.contributor.institutionPOLIMEROS
dc.contributor.institutionCentros PRE-FUSION TECNALIA - (FORMER)
dc.date.accessioned2024-07-24T12:09:38Z
dc.date.available2024-07-24T12:09:38Z
dc.date.issued1992
dc.description.abstractThe influence of both the processing parameters and mould geometry on the mechanical properties and surface quality of polypropylene based glass mat reinforced thermoplastic (gmt) parts was studied. The parameters controlled were the forming pressure, the temperature in the surface of the blank, and the mould temperature. The influence of the geometry was also studied using three different moulds. It was seen that the mechanical properties did not vary substantially for the ranges of temperature and pressure used. Some differences were seen among the data collected from different moulds and a correlation existed between the surface quality of the parts and the mould temperature and design.en
dc.description.statusPeer reviewed
dc.format.extent6
dc.identifier.citationRubio , A , Eguizabal , P , Mendizabal , M A & Liceaga , J F 1992 , ' Influence of the processing parameters on glass mat reinforced thermoplastic (GMT) stamping ' , Composites Manufacturing , vol. 3 , no. 1 , pp. 47-52 . https://doi.org/10.1016/0956-7143(92)90183-U
dc.identifier.doi10.1016/0956-7143(92)90183-U
dc.identifier.issn0956-7143
dc.identifier.urihttps://hdl.handle.net/11556/3995
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=0040518444&partnerID=8YFLogxK
dc.language.isoeng
dc.relation.ispartofComposites Manufacturing
dc.rightsinfo:eu-repo/semantics/restrictedAccess
dc.subject.keywordsGMT
dc.subject.keywordsprocessing parameters
dc.subject.keywordsproperties
dc.subject.keywordsstamping
dc.subject.keywordsthermoplastic composites
dc.subject.keywordsGeneral Engineering
dc.titleInfluence of the processing parameters on glass mat reinforced thermoplastic (GMT) stampingen
dc.typejournal article
Files