Test bench for helicopter electro mechanical actuation system validation: Design and validation of dedicated test bench for aeronautical electromechanical actuators

Simple item page
dc.contributor.authorEchevarria, Imanol
dc.contributor.authorLasa, Joseba
dc.contributor.authorCasado, Pablo
dc.contributor.authorDominguez, Alberto
dc.contributor.authorEguizabal, Inigo
dc.contributor.authorLizeaga, Mikel
dc.contributor.authorPerez, Raul
dc.contributor.authorBerenguer, Oscar
dc.contributor.institutionINNOV_AIR_MOBIL
dc.contributor.institutionROBOTICA_AUTOMA
dc.contributor.institutionTecnalia Research & Innovation
dc.contributor.institutionMAQUINAS
dc.contributor.institutionTECNOLOGÍAS DE HIDRÓGENO
dc.date.accessioned2024-07-24T11:53:40Z
dc.date.available2024-07-24T11:53:40Z
dc.date.issued2015-06-16
dc.descriptionPublisher Copyright: © 2015 IEEE.
dc.description.abstractThe introduction of a new product in the aeronautical sector implies conducting characterization tests in an automated, safe and sustainable way. This paper describes a dedicated test bench design and validation that allows characterizing a swashplate Helicopter Electro Mechanical Actuation System (HEMAS). The test bench replicates the operating conditions that the actuator will encounter in service simulating the aerodynamic force by a hydraulic counter load system. The results obtained in validation tests show the ability of the test bench to replicate specified test cases. The validation was performed using a hydraulic cylinder to replicate the motion profile that will be followed by the actuator. The test campaign with the actuator will be performed during 2015.en
dc.description.statusPeer reviewed
dc.format.extent7
dc.identifier.citationEchevarria , I , Lasa , J , Casado , P , Dominguez , A , Eguizabal , I , Lizeaga , M , Perez , R & Berenguer , O 2015 , Test bench for helicopter electro mechanical actuation system validation : Design and validation of dedicated test bench for aeronautical electromechanical actuators . in 2015 IEEE International Conference on Industrial Technology, ICIT 2015 . June edn , 7125151 , Proceedings of the IEEE International Conference on Industrial Technology , no. June , vol. 2015-June , Institute of Electrical and Electronics Engineers Inc. , pp. 517-523 , 2015 IEEE International Conference on Industrial Technology, ICIT 2015 , Seville , Spain , 17/03/15 . https://doi.org/10.1109/ICIT.2015.7125151
dc.identifier.citationconference
dc.identifier.doi10.1109/ICIT.2015.7125151
dc.identifier.isbn9781479978007
dc.identifier.urihttps://hdl.handle.net/11556/2324
dc.identifier.urlhttp://www.scopus.com/inward/record.url?scp=84937676427&partnerID=8YFLogxK
dc.language.isoeng
dc.publisherInstitute of Electrical and Electronics Engineers Inc.
dc.relation.ispartof2015 IEEE International Conference on Industrial Technology, ICIT 2015
dc.relation.ispartofseriesProceedings of the IEEE International Conference on Industrial Technology
dc.rightsinfo:eu-repo/semantics/restrictedAccess
dc.subject.keywordsActuators
dc.subject.keywordsDesign
dc.subject.keywordsElectro mechanical
dc.subject.keywordsEMA
dc.subject.keywordsHEMAS
dc.subject.keywordsSimulation
dc.subject.keywordsTest bench
dc.subject.keywordsTest rig
dc.subject.keywordsComputer Science Applications
dc.subject.keywordsElectrical and Electronic Engineering
dc.titleTest bench for helicopter electro mechanical actuation system validation: Design and validation of dedicated test bench for aeronautical electromechanical actuatorsen
dc.typeconference output
Files