Search

Now showing items 1-10 of 127

Development of a rotary union for Gifford-McMahon cryocoolers utilized in a 10 MW offshore superconducting wind turbine

Sun, Jiuce; Sanz, Santiago; León, Andrés; Fraser, Jim; Neumann, Holger (Institute of Physics Publishing, 2017-12-30)
conferenceObject

A practical approach to HFI based sensorless control of PM-assisted synchronous reluctance machines applied to EVs and HEVs

Trancho, E.; Ibarra, E.; Arias, A.; Kortabarria, I.; Prieto, P. (IEEE, 2017-12-18)
conferenceObject

Techno-economic assessment of different routes for olefins production through the oxidative coupling of methane (OCM): Advances in benchmark technologies

Spallina, Vincenzo; Velarde, Ildefonso Campos; Medrano Jimenez, José Antonio; Godini, Hamid Reza; Gallucci, Fausto; [et al.] (Elsevier Ltd, 2017-12-15)
article

Using 3DVAR data assimilation to measure offshore wind energy potential at different turbine heights in the West Mediterranean

Ulazia, Alain; Sáenz, Jon; Ibarra-Berastegui, Gabriel; González-Rojí, Santos J.; Carreno-Madinabeitia, Sheila (Elsevier Ltd, 2017-12-15)
article

Analysis of electrical drive speed control limitations of a power take-off system for wave energy converters

Gaspar, José F.; Kamarlouei, Mojtaba; Sinha, Ashank; Xu, Haitong; Calvário, Miguel; [et al.] (PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2017-12)
article

Impact of Si on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel Treated by Quenching & Partitioning (Q&P)

Linke, Bernd M.; Gerber, Thomas; Hatscher, Ansgar; Salvatori, Ilaria; Aranguren, Iñigo; [et al.] (Springer US, 2017-11-21)
article

Ladle furnace slag characterization through hyperspectral reflectance regression model for secondary metallurgy process optimization

Picon, Artzai; Vicente Rojo, Asier; Rodriguez-Vaamonde, Sergio; Armentia, Jorge; Arteche, Jose Antonio; [et al.] (IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 445 HOES LANE, PISCATAWAY, NJ 08855-4141 USA, 2017-11-13)
article

«
1
2
3
4
. . .
13
»

Search

Development of a rotary union for Gifford-McMahon cryocoolers utilized in a 10 MW offshore superconducting wind turbine

A practical approach to HFI based sensorless control of PM-assisted synchronous reluctance machines applied to EVs and HEVs

Techno-economic assessment of different routes for olefins production through the oxidative coupling of methane (OCM): Advances in benchmark technologies

Using 3DVAR data assimilation to measure offshore wind energy potential at different turbine heights in the West Mediterranean

Analysis of electrical drive speed control limitations of a power take-off system for wave energy converters

Impact of Si on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel Treated by Quenching & Partitioning (Q&P)

Ladle furnace slag characterization through hyperspectral reflectance regression model for secondary metallurgy process optimization

TECNOLOGÍAS ASOCIADAS AL SISTEMA POWER TO GAS

A new era in the energy performance of buildings

Modelling of Light Mg and Al Based Alloys as “in situ” Composites

Browse

My Account

Discover

Of interest

Search

Filters

Development of a rotary union for Gifford-McMahon cryocoolers utilized in a 10 MW offshore superconducting wind turbine

A practical approach to HFI based sensorless control of PM-assisted synchronous reluctance machines applied to EVs and HEVs

Techno-economic assessment of different routes for olefins production through the oxidative coupling of methane (OCM): Advances in benchmark technologies

Using 3DVAR data assimilation to measure offshore wind energy potential at different turbine heights in the West Mediterranean

Analysis of electrical drive speed control limitations of a power take-off system for wave energy converters

Impact of Si on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel Treated by Quenching & Partitioning (Q&P)

Ladle furnace slag characterization through hyperspectral reflectance regression model for secondary metallurgy process optimization

TECNOLOGÍAS ASOCIADAS AL SISTEMA POWER TO GAS

A new era in the energy performance of buildings

Modelling of Light Mg and Al Based Alloys as “in situ” Composites