Browsing TECNALIA by Issue Date

Deep Learning-Based Method for Accurate Real-Time Seed Detection in Glass Bottle Manufacturing

Bereciartua-Perez, Arantza; Duro, Gorka; Echazarra, Jone; González, Francico Javier; Serrano, Alberto; [et al.] (Multidisciplinary Digital Publishing Institute (MDPI), 2022-11-04)
article

A high-temperature heat pump for compressed heat energy storage applications: Design, modeling, and performance

Hassan, Abdelrahman H.; Corberán, José M.; Ramirez, Miguel; Trebilcock-Kelly, Felipe; Payá, Jorge (Elsevier Ltd, 2022-11)
article

Surface chemistry and bioactivity of colloidal particles from industrial kraft lignins

Gordobil, Oihana; Li, Huisi; Izquierdo, Ana Ayerdi; Egizabal, Ainhoa; Sevastyanova, Olena; [et al.] (Elsevier B.V., 2022-11)
article

Corrosion performance of alloy 800H and alloy 625 for potential use as molten salts solar receiver materials in concentrating solar power tower plants

Prieto, Cristina; Ruiz-Cabañas, F. Javier; Madina, Virginia; Fernández, A. Inés; Cabeza, Luisa F. (Elsevier Ltd, 2022-11)
article

Biosynthesis of gamma-aminobutyric acid by Lactiplantibacillus plantarum K16 as an alternative to revalue agri-food by-products

Diez-Gutiérrez, Lucía; Vicente, Leire San; Sáenz, Jessica; Esquivel, Argitxu; Barron, Luis Javier R.; [et al.] (Springer Nature, 2022-11)
article

Adhesion Enhancement on a Duplex DLC HiPIMS Positive Pulse Coating Performed by Active Screen Plasma Nitriding Pretreatment on 316L Stainless Steel Substrate

Gómez, Iñigo; García, Jose Antonio; Santiago, Jose Antonio; Fernandez, Iván; Jose Fernandez, Palacio; [et al.] (Hindawi, 2022-11)
article

Development of a Novel Biobased Polyurethane Resin System for Structural Composites

Echeverria-Altuna, Oihane; Ollo, Olatz; Larraza, Izaskun; Elizetxea, Cristina; Harismendy, Isabel; [et al.] (Multidisciplinary Digital Publishing Institute (MDPI), 2022-10-27)
article

Digital Quantum Simulation and Circuit Learning for the Generation of Coherent States

Liu, Ruilin; V. Romero, Sebastián; Oregi, Izaskun; Osaba, Eneko; Villar-Rodriguez, Esther; [et al.] (Multidisciplinary Digital Publishing Institute (MDPI), 2022-10-25)
article

Development of a Sustainable Metallurgical Process to Valorize Copper Smelting Wastes with Olive Stones-Based Biochar

Adrados, Aitziber; Merchán, Mikel; Obregón, Alejandro; Artola, Antxon; Iparraguirre, Jon Ander; [et al.] (Multidisciplinary Digital Publishing Institute (MDPI), 2022-10-14)
article

New chromium steel grade for creep applications

Callejo, Lorena M; Barbero, José Ignacio; Serna-Ruiz, Mónica; Eguizabal, David; Martinez, Roberto Fernandez; [et al.] (IOP Publishing, 2022-10-11)
article

Characterisation of the probiotic potential of Lactiplantibacillus plantarum K16 and its ability to produce the postbiotic metabolite γ-aminobutyric acid

Diez-Gutiérrez, Lucía; San Vicente, Leire; Sáenz, Jessica; Barron, Luis Javier R.; Chávarri, María (Elsevier Ltd, 2022-10)
article

Transient thermal parameters correlation of spacecraft thermal models against test results

Garmendia, Iñaki; Anglada, Eva (Elsevier Ltd, 2022-10)
article

Economic Implications of DSO-TSO Coordination Schemes at a System Level and for Market Actors in case of Flexibility or Traditional Grid-based Solution

Madina, Carlos; Gonzalez-Garrido, Amaia; Gomez-Arriola, Ines (IEEE, 2022-10)
conferenceObject

Guest Editorial Artificial Intelligence and Deep Learning for Intelligent and Sustainable Traffic and Vehicle Management (VANETs)

Gupta, Brij B.; Agrawal, Dharma P.; Sajjad, Muhammad; Sheng, Michael; Del Ser, Javier (Institute of Electrical and Electronics Engineers Inc., 2022-10)
article

Evoked sensations with transcutaneous electrical stimulation with different frequencies, waveforms, and electrode configurations

Imatz‐Ojanguren, Eukene; Keller, Thierry (John Wiley and Sons Ltd, 2022-09-14)
article

Influence of Ni and Process Parameters in Medium Mn Steels Heat Treated by High Partitioning Temperature Q&P Cycles

Del Molino, Eider; Arribas Telleria, Maribel; Gilliams, Casey; Arlazarov, Artem; González, Javier Jesús; [et al.] (Springer Nature, 2022-09-02)
article

Polyurethane/acrylic hybrid dispersions containing phosphorus reactive flame retardants as transparent coatings for wood

Puyadena, M.; Etxeberria, I.; Martin, L.; Mugica, A.; Agirre, A.; [et al.] (Elsevier B.V., 2022-09)
article

Hot stamping of aerospace aluminium alloys: Automotive technologies for the aeronautics industry

Atxaga, G.; Arroyo, A.; Canflanca, B. (Elsevier, 2022-09)
article

Composite material incorporating protective coatings for photovoltaic cell encapsulation

Yurrita, Naiara; Aizpurua, Jon; Cambarau, Werther; Imbuluzqueta, Gorka; Hernández, Juan M.; [et al.] (Elsevier, 2022-09)
article

Development and Initial testing of a Virtual Laboratory for the Build-up and Testing of Microgrid Management Algorithms

Fernández, G.; Menéndez, A.; Meneses, P.; Zubiria, A.; García, A.; [et al.] (European Association for the Development of Renewable Energies, Environment and Power Quality, 2022-09)
article

Browsing TECNALIA by Issue Date

Deep Learning-Based Method for Accurate Real-Time Seed Detection in Glass Bottle Manufacturing

A high-temperature heat pump for compressed heat energy storage applications: Design, modeling, and performance

Surface chemistry and bioactivity of colloidal particles from industrial kraft lignins

Corrosion performance of alloy 800H and alloy 625 for potential use as molten salts solar receiver materials in concentrating solar power tower plants

Biosynthesis of gamma-aminobutyric acid by Lactiplantibacillus plantarum K16 as an alternative to revalue agri-food by-products

Adhesion Enhancement on a Duplex DLC HiPIMS Positive Pulse Coating Performed by Active Screen Plasma Nitriding Pretreatment on 316L Stainless Steel Substrate

Development of a Novel Biobased Polyurethane Resin System for Structural Composites

Digital Quantum Simulation and Circuit Learning for the Generation of Coherent States

Development of a Sustainable Metallurgical Process to Valorize Copper Smelting Wastes with Olive Stones-Based Biochar

New chromium steel grade for creep applications

Characterisation of the probiotic potential of Lactiplantibacillus plantarum K16 and its ability to produce the postbiotic metabolite γ-aminobutyric acid

Transient thermal parameters correlation of spacecraft thermal models against test results

Economic Implications of DSO-TSO Coordination Schemes at a System Level and for Market Actors in case of Flexibility or Traditional Grid-based Solution

Guest Editorial Artificial Intelligence and Deep Learning for Intelligent and Sustainable Traffic and Vehicle Management (VANETs)

Evoked sensations with transcutaneous electrical stimulation with different frequencies, waveforms, and electrode configurations

Influence of Ni and Process Parameters in Medium Mn Steels Heat Treated by High Partitioning Temperature Q&P Cycles

Polyurethane/acrylic hybrid dispersions containing phosphorus reactive flame retardants as transparent coatings for wood

Hot stamping of aerospace aluminium alloys: Automotive technologies for the aeronautics industry

Composite material incorporating protective coatings for photovoltaic cell encapsulation

Development and Initial testing of a Virtual Laboratory for the Build-up and Testing of Microgrid Management Algorithms

Browse

My Account

Of interest

Browsing TECNALIA by Issue Date

Deep Learning-Based Method for Accurate Real-Time Seed Detection in Glass Bottle Manufacturing ﻿

A high-temperature heat pump for compressed heat energy storage applications: Design, modeling, and performance ﻿

Surface chemistry and bioactivity of colloidal particles from industrial kraft lignins ﻿

Corrosion performance of alloy 800H and alloy 625 for potential use as molten salts solar receiver materials in concentrating solar power tower plants ﻿

Biosynthesis of gamma-aminobutyric acid by Lactiplantibacillus plantarum K16 as an alternative to revalue agri-food by-products ﻿

Adhesion Enhancement on a Duplex DLC HiPIMS Positive Pulse Coating Performed by Active Screen Plasma Nitriding Pretreatment on 316L Stainless Steel Substrate ﻿

Development of a Novel Biobased Polyurethane Resin System for Structural Composites ﻿

Digital Quantum Simulation and Circuit Learning for the Generation of Coherent States ﻿

Development of a Sustainable Metallurgical Process to Valorize Copper Smelting Wastes with Olive Stones-Based Biochar ﻿

New chromium steel grade for creep applications ﻿

Characterisation of the probiotic potential of Lactiplantibacillus plantarum K16 and its ability to produce the postbiotic metabolite γ-aminobutyric acid ﻿

Transient thermal parameters correlation of spacecraft thermal models against test results ﻿

Economic Implications of DSO-TSO Coordination Schemes at a System Level and for Market Actors in case of Flexibility or Traditional Grid-based Solution ﻿

Guest Editorial Artificial Intelligence and Deep Learning for Intelligent and Sustainable Traffic and Vehicle Management (VANETs) ﻿

Evoked sensations with transcutaneous electrical stimulation with different frequencies, waveforms, and electrode configurations ﻿

Influence of Ni and Process Parameters in Medium Mn Steels Heat Treated by High Partitioning Temperature Q&P Cycles ﻿

Polyurethane/acrylic hybrid dispersions containing phosphorus reactive flame retardants as transparent coatings for wood ﻿

Hot stamping of aerospace aluminium alloys: Automotive technologies for the aeronautics industry ﻿

Composite material incorporating protective coatings for photovoltaic cell encapsulation ﻿

Development and Initial testing of a Virtual Laboratory for the Build-up and Testing of Microgrid Management Algorithms ﻿

Deep Learning-Based Method for Accurate Real-Time Seed Detection in Glass Bottle Manufacturing

A high-temperature heat pump for compressed heat energy storage applications: Design, modeling, and performance

Surface chemistry and bioactivity of colloidal particles from industrial kraft lignins

Corrosion performance of alloy 800H and alloy 625 for potential use as molten salts solar receiver materials in concentrating solar power tower plants

Biosynthesis of gamma-aminobutyric acid by Lactiplantibacillus plantarum K16 as an alternative to revalue agri-food by-products

Adhesion Enhancement on a Duplex DLC HiPIMS Positive Pulse Coating Performed by Active Screen Plasma Nitriding Pretreatment on 316L Stainless Steel Substrate

Development of a Novel Biobased Polyurethane Resin System for Structural Composites

Digital Quantum Simulation and Circuit Learning for the Generation of Coherent States

Development of a Sustainable Metallurgical Process to Valorize Copper Smelting Wastes with Olive Stones-Based Biochar

New chromium steel grade for creep applications

Characterisation of the probiotic potential of Lactiplantibacillus plantarum K16 and its ability to produce the postbiotic metabolite γ-aminobutyric acid

Transient thermal parameters correlation of spacecraft thermal models against test results

Economic Implications of DSO-TSO Coordination Schemes at a System Level and for Market Actors in case of Flexibility or Traditional Grid-based Solution

Guest Editorial Artificial Intelligence and Deep Learning for Intelligent and Sustainable Traffic and Vehicle Management (VANETs)

Evoked sensations with transcutaneous electrical stimulation with different frequencies, waveforms, and electrode configurations

Influence of Ni and Process Parameters in Medium Mn Steels Heat Treated by High Partitioning Temperature Q&P Cycles

Polyurethane/acrylic hybrid dispersions containing phosphorus reactive flame retardants as transparent coatings for wood

Hot stamping of aerospace aluminium alloys: Automotive technologies for the aeronautics industry

Composite material incorporating protective coatings for photovoltaic cell encapsulation

Development and Initial testing of a Virtual Laboratory for the Build-up and Testing of Microgrid Management Algorithms