Browsing by Keyword "Flame retardance"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Fire retardancy of polypropylene composites reinforced with rice husks: From oxygen index measurements and cone calorimetry to large-scale single-burning-item tests: From oxygen index measurements and cone calorimetry to large-scale single-burning-item tests(2018-10-05) Schirp, Arne; Barrio, Aitor; BIOECONOMÍA Y CO2Rice husks containing 12 wt % inorganic silica were incorporated together with halogen‐free fire retardants in a polypropylene matrix and extruded into facade profiles. An increase in the amount of rice husks resulted in an increase in the oxygen index. The cone calorimetry measurements showed that all of the fire retardants tested significantly reduced the peak heat‐release rate (pHRR) and maximum average rate of heat emission (MARHE) of the formulations and moderately reduced total heat release. The best results in terms of MARHE were achieved for the formulation including 24% melamine‐coated ammonium polyphosphate. pHRR and MARHE were reduced with increasing amount of rice husks. Single‐burning‐item (SBI) tests were performed for the extruded profiles based on rice husks and, for comparison, wood flour. In the best case, a B‐s2, d0 classification was obtained. The results obtained from cone calorimetry and SBI tests were in agreement. Inc. J. Appl. Polym. Sci. 2018, 135, 46654.Item Thermal and fire behavior of isophorone diisocyanate based polyurethane foams containing conventional flame retardants(2018-03-10) Eceiza, I.; Barrio, A.; Martín, L.; Veganzones, M. A.; Fernández-Berridi, M. J.; Irusta, L.; BIOECONOMÍA Y CO2This work reports on the fire behavior of isophorone diisocyanate-based polyurethane foams containing different conventional flame retardants (FRs) such as melamine, ammonium polyphosphate, aluminum hydroxide, expandable graphite, and their combinations. The foams were obtained in a laboratory scale and characterized in terms of their morphology, density, thermal stability, and fire behavior. According to atomic force microscopy, the incorporation of FRs decreased the phase separated domain size. The cellular structure of the foams was examined qualitatively by scanning electron microscopy while the quantitative analysis of the surrounding skin was performed by optical microscopy and Image J. The FR containing foams showed more and smaller cells. The thermogravimetric analysis showed that the FRs had no influence in the initial degradation temperature of the foams. However, the obtained residue values were higher than the theoretical ones, indicating that there was some type of interaction between the FRs and the foams. The fire behavior of polyurethane foams was studied by the cone calorimeter and the data showed that the introduction of expandable graphite and combinations of ammonium polyphosphate/melamine to the reference foam gave rise to a significant reduction in the total heat release. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 45944.