Browsing by Keyword "Biogas upgrading"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Thermodynamic, economic and environmental assessment of energy systems including the use of gas from manure fermentation in the context of the Spanish potential(2020-06-01) Skorek-Osikowska, Anna; Martin-Gamboa, Mario; Iribarren, Diego; García-Gusano, Diego; Dufour, Javier; Tecnalia Research & Innovation; PLANIFICACIÓN ENERGÉTICAOne of the prospective technologies that can be used for energy generation in distributed systems is based on biogas production, usually involving fermentation of various types of biomass and waste. This article aims to bring novelty on the analysis of this type of systems, joining together thermodynamic, economic and environmental aspects for a cross-cutting evaluation of the proposed solutions. The analysis is made for Spain, for which such a solution is very promising due to availability of the feedstock. A detailed simulation model of the proposed system in two different cases was built in Aspen Plus software and Visual Basic for Applications. Case 1 involves production of biogas in manure fermentation process, its upgrading (cleaning and removal of CO2 from the gas) and injection to the grid. Case 2 assumes combustion of the biogas in gas engine to produce electricity and heat that can be used locally and/or sold to the grid. Thermodynamic assessment of these two cases was made to determine the most important parameters and evaluation indices. The results served as input values for the economic analysis and environmental evaluation through Life Cycle Assessment of the energy systems. The results show that the analysed technologies have potential to produce high-value products based on low-quality biomass. Economic evaluation determined the break-even price of biomethane (Case 1) and electricity (Case 2), which for the nominal assumptions reach the values of 16.77 €/GJ and 28.92 €/GJ, respectively. In terms of environmental assessment the system with the use of biogas in gas engine presents around three times better environmental profile than Case 1 in the two categories evaluated, i.e., carbon and energy footprint.Item Upgrading biogas with novel composite carbon molecular sieve (CCMS) membranes: Experimental and techno-economic assessment: Experimental and techno-economic assessment(2020-08-15) Medrano, J.A.; Llosa-Tanco, M.A.; Cechetto, V.; Pacheco-Tanaka, D.A.; Gallucci, F.; TECNOLOGÍA DE MEMBRANAS E INTENSIFICACIÓN DE PROCESOSThe use of biogas as feedstock for hydrogen production was widely proposed in the literature in the last years as a strategy to reduce anthropogenic carbon emissions. However, its lower heating value compared to natural gas hampers the revamping of existing reforming plants. The use of composite carbon molecular sieve membranes for biogas upgrading (CO2 removal from biogas) was investigated experimentally in this work. In particular, ideal perm-selectivities and permeabilities above the Robeson plot for CO2/CH4 mixtures have been obtained. These membranes show better performances compared to polymeric membranes, which are nowadays commercialized for CO2 separation in natural gas streams. Compared to polymeric membranes, carbon membranes do not show deactivation by plasticization when exposed to CO2, and thus can find industrial application. This work was extended with a techno-economic analysis where carbon membranes are installed in a steam methane reforming plant. Results have been first validated with data from literature and show that the use of biogas increases the costs of hydrogen production to a value of 0.25 €/Nm3 compared to the benchmark technology (0.21 €/Nm3). On the other hand, the use of biogas leads to a decrease in carbon emissions up to 95%, thus the use of biogas for hydrogen production is foreseen as a very interesting alternative to conventional technologies in view of the reduction in the carbon footprint in the novel technologies that are to be installed in the near future.