Browsing by Author "Vaquero, Celina"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Exposure Assessment During the Industrial Formulation and Application of Photocatalytic Mortars Based on Safer n-TiO2 Additives(2020-03) Vaquero, Celina; Esteban-Cubillo, Antonio; Santaren, Julio; López de Ipiña, Jesús; Galarza, Nekane; Aragón, Gaizka; Múgica, Iñaki; Larraza, Iñigo; Pina-Zapardiel, Raúl; Gutierrez-Cañas, Cristina; PRINTEX; SMART_MONTitanium dioxide nanoparticles (n-TiO2) are added to photocatalytic mortars to improve urban air quality. Their activity can be increased by dispersing and binding them on natural sepiolite surface. Workers handling photocatalytic additives can be exposed to n-TiO2. However, the release of nanoparticles to the workplace can be different if the material used is raw n-TiO2 powders or if the nanoparticles are supported on sepiolite. In this work, we compare occupational exposure to n-TiO2 for raw n-TiO2 and a hybrid additive n-TiO2/sepiolite obtained by a proprietary process. Measurements were performed in two industrial sites that process 1 ton batches of mortars, formulated with the same quantity of n-TiO2, followed by their application outdoors. Direct reading instruments were used to monitor particle number concentration and size distribution. Simultaneously, filter-based samples were collected for mass concentration and microscopy analysis. Two tasks produced a significant release of particles, the addition of fillers during the mortar formulation, in site 1, and the mixing of mortar with water for its application in the second site. For the first task, particle concentration was significantly lower when the n-TiO2/sepiolite was added compared to the raw n-TiO2. For the second task, once the mortar is fully formulated, this metric does not identify differences among the batches. Titanium mass concentration was 3–10 times lower when handling the mortar formulated with the hybrid additive. These results suggest that supporting the n-TiO2 on the sepiolite network not only increases the photocatalytic activity, but is also a safer design that reduces exposure to nanoparticles.Item Limitations and information needs for engineered nanomaterial-Specific exposure estimation and scenarios: Recommendations for improved reporting practices(2012-09) Clark, Katherine; Van Tongeren, Martie; Christensen, Frans M.; Brouwer, Derk; Nowack, Bernd; Gottschalk, Fadri; Micheletti, Christian; Schmid, Kaspar; Gerritsen, Rianda; Aitken, Rob; Vaquero, Celina; Gkanis, Vasileios; Housiadas, Christos; De Ipĩa, Jesús María López; Riediker, Michael; PRINTEX; SMART_MONThe aim of this paper is to describe the process and challenges in building exposure scenarios for engineered nanomaterials (ENM), using an exposure scenario format similar to that used for the European Chemicals regulation (REACH). Over 60 exposure scenarios were developed based on information from publicly available sources (literature, books, and reports), publicly available exposure estimation models, occupational sampling campaign data from partnering institutions, and industrial partners regarding their own facilities. The primary focus was on carbon-based nanomaterials, nano-silver (nano-Ag) and nano-titanium dioxide (nano-TiO2), and included occupational and consumer uses of these materials with consideration of the associated environmental release. The process of building exposure scenarios illustrated the availability and limitations of existing information and exposure assessment tools for characterizing exposure to ENM, particularly as it relates to risk assessment. This article describes the gaps in the information reviewed, recommends future areas of ENM exposure research, and proposes types of information that should, at a minimum, be included when reporting the results of such research, so that the information is useful in a wider context.Item Safe-by-design strategies applied to scaffold hybrid manufacturing(2021-06-22) López De Ipiña, Jesús M.; Vaquero, Celina; Egizabal, Ainhoa; Patelli, Alessandro; Moroni, Lorenzo; SMART_MON; PRINTEX; BiomaterialesThe EU-project FAST (GA 685825) has developed a 3D printer machine prototype for the manufacture of bone implants (scaffolds), by merging masterbatches of biodegradable polymer poly(ethylene oxide)terephthalate/poly(butylene terephthalate) [PEOT/PBT] doped with nanofillers [reduced graphene oxide (rGO), hydroxyapatite (HA) and magnesium aluminium hydroxide ciprofloxacin hydrotalcite (LDH-CFX)], and atmospheric plasma technology. This paper focus on the safe design strategies identified by FAST to address the risk to health resulting from the potential airborne emission of nano-objects and their aggregates and agglomerates (NOAAs) by the 3D printer prototype, which might result in occupational exposures by inhalation. The work also includes measurements of airborne emissions and occupational exposures carried out during the verification stage of the prototype design. Nanofillers particles (rGO, n-HA, LDH-CFX) were not observed, neither at source nor in the working area, suggesting no release of free nanofillers to the air one they have been embedded in the polymer masterbatch. Additionally, the exposure in the workplace was far below the selected Occupational Exposure Levels (OELs), for total particle number concentration (PNC), dust, elemental carbon (EC) and volatile organic compounds (VOCs). The results showed that, when working with the current prototype in normal operation (for its intended use) and with controls enabled [enclosure with the doors closed and Local Exhaust Ventilation (LEV) activated], the emission from the machine and the worker's exposure to NOAAs are well controlled.