Browsing by Author "Porta, Matteo"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Comparison between Energy Simulation and Monitoring Data in an Office Building(2021-12-30) Martin-Escudero, Koldobika; Atxalandabaso, Garazi; Erkoreka, Aitor; Uriarte, Amaia; Porta, Matteo; EDIFICACIÓN DE ENERGÍA POSITIVA; Tecnalia Research & InnovationOne of the most important steps in the retrofitting process of a building is to understand its pre-retrofitting stage energy performance. The best choice for carrying this out is by means of a calibrated building energy simulation (BES) model. Then, the testing of different retrofitting solutions in the validated model allows for quantifying the improvements that may be obtained, in order to choose the most suitable solution. In this work, based on the available detailed building drawings, constructive details, building operational data and the data sets obtained on a minute basis (for a whole year) from a dedicated energy monitoring system, the calibration of an in-use office building energy model has been carried out. It has been possible to construct a detailed white box model based on Design Builder software. Then, comparing the model output for indoor air temperature, lighting consumption and heating consumption against the monitored data, some of the building envelope parameters and inner building inertia of the model were fine tuned to obtain fits fulfilling the ASHRAE criteria. Problems found during this fitting process and how they are solved are explained in detail. The model calibration is firstly performed on an hourly basis for a typical winter and summer week; then, the whole year results of the simulation are compared against the monitored data. The results show a good agreement for indoor temperature, lighting and heating consumption compared with the ASHRAE criteria for the mean bias error (MBE).Item Smart dual thermal network(2017) Sánchez, Víctor F.; Uriarte, Amaia; Barreiro, Eneritz; Porta, Matteo; EDIFICACIÓN DE ENERGÍA POSITIVA; Tecnalia Research & Innovation; GENERALConventional district heating (DH) systems enable demand aggregation at district level and can provide high centralized heat generation performance values. However, thermal Renewable Energy Sources (RES) deployment at building level still remains low, and exploitation suboptimal, as it is limited by the instantaneous thermal load and storage capacity availability of each building. Buildings play the role of consumers that request a variable amount of heat over time and the thermal network the role of unidirectional heat supplier, without any smart interaction. The FP7 project A2PBEER has developed an innovative Smart Dual Thermal Network concept based on RES and Combined Heat and Power (CHP) as generation technologies, that enables transforming existing suboptimal DH systems, into integrated thermal networks with optimized performance and building level RES system production exploitation. It is based on an innovative Smart Dual Building Thermal Substation concept, which allows a bidirectional heat exchange of the buildings with the thermal network, and to aggregate district level distributed production and storage capacity (Virtual District Plant). With this approach buildings become prosumers maximizing decentralized RES production exploitation, as any possible local heat production surplus on any building of the district, will be delivered to the network to be used by other buildings. Additionally, this thermal network allows the delivery of the energy necessary to meet the heating and cooling demand of the buildings through a single hot water distribution network. In this way, it is possible to upgrade conventional DH systems to district heating and cooling systems, without the construction of a district cooling plant and a dedicated cooling distribution network. Cooling is produced at building level through sorption technologies using locally deployed solar collectors and the thermal network as energy sources. Finally, the district typologies and climatic conditions that maximize the potential of this thermal network concept have been identified.