Browsing by Author "Parco, Maria"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Comparison of Physical-chemical and Mechanical Properties of Chlorapatite and Hydroxyapatite Plasma Sprayed Coatings(2015) Demnati, Imane; Grossin, David; Marsan, Olivier; Bertrand, Ghislaine; Collonges, Gérard; Combes, Christèle; Parco, Maria; Braceras, I.; Alexis, Joel; Balcaen, Yannick; Rey, Christian; EXTREMAT; INGENIERÍA DE SUPERFICIESChlorapatite can be considered a potential biomaterial for orthopaedic applications. Its use as plasma-sprayed coating could be of interest considering its thermal properties and particularly its ability to melt without decomposition unlike hydroxyapatite. Chlorapatite (ClA) was synthesized by a high-temperature ion exchange reaction starting from commercial stoichiometric hydroxyapatites (HA). The ClA powder showed similar characteristics as the original industrial HA powder, and was obtained in the monoclinic form. The HA and ClA powders were plasma-sprayed using a low-energy plasma spraying system with identical processing parameters. The coatings were characterized by physical-chemical methods, i.e. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy, including distribution mapping of the main phases detected such as amorphous calcium phosphate (ACP), oxyapatite (OA), and HA or ClA. The unexpected formation of oxyapatite in ClA coatings was assigned to a side reaction with contaminating oxygenated species (O2, H2O). ClA coatings exhibited characteristics different from HA, showing a lower content of oxyapatite and amorphous phase. Although their adhesion strength was found to be lower than that of HA coatings, their application could be an interesting alternative, offering, in particular, a larger range of spraying conditions without formation of massive impurities.Item Preparation and characterization of metallic supported thin Pd–Ag membranes for hydrogen separation(2016-12-01) Fernandez, Ekain; Medrano, Jose Antonio; Melendez, Jon; Parco, Maria; Viviente, Jose Luis; van Sint Annaland, Martin; Gallucci, Fausto; Pacheco Tanaka, D. A.; TECNOLOGÍAS DE HIDRÓGENO; Tecnalia Research & Innovation; EXTREMAT; TECNOLOGÍA DE MEMBRANAS E INTENSIFICACIÓN DE PROCESOSThis paper reports the preparation and characterization of thin-film (4–5 μm thick) Pd–Ag metallic supported membranes for high temperature applications. Various thin film membranes have been prepared by depositing a ceramic interdiffusion barrier layer prior to the simultaneous Pd–Ag electroless plating deposition. Two deposition techniques for ceramic layers (made of zirconia and alumina) have been evaluated: Atmospheric Plasma Spraying and dip coating of a powder suspension. Initially, the prepared ceramic layers have been characterized for nitrogen permeation at room temperature and surface roughness for the selection of the appropriate type of ceramic layer. The most promising membranes have been tested at 400–600 °C for single gas permeation (H2 and N2), and have shown extremely high H2/N2 permselectivities (>200,000).