Show simple item record

dc.contributor.authorGalarza, N.
dc.contributor.authorRubio, B.
dc.contributor.authorBereziartua, A.
dc.contributor.authorLozano, I.
dc.contributor.authorGascon, Jaime
dc.contributor.authorAtxaga, G.
dc.contributor.authorPerez, J.
dc.contributor.authorRubio, J.
dc.date.accessioned2019-06-28T11:45:54Z
dc.date.available2019-06-28T11:45:54Z
dc.date.issued2019
dc.identifier.urihttp://hdl.handle.net/11556/731
dc.description.abstractBionic Aircraft is a project founded under the H2020 Framework Program and it is a result of a need to reduce emissions due to the impact of the growth of the aviation industry. The introduction of Additive Laser Manufacturing (ALM) to produce some metal aircraft parts is considered as an opportunity to address this issue. This technology allows to produce ultra-lightweight and highly complex parts (so-called “bionic parts”). One of the actions to consider in the project is the development of new NDT strategies to inspect, in-service, parts produced by ALM made of Al-based alloys. This need arises because, ALM processes for these alloys are at low maturity level (TRL2) and hence, no proven and certified NDT methods are yet developed. Moreover, in-service inspection of aeronautic bionic parts involves challenges like the uncertainty of the inner inspection of a layered material, the lack of accessibility (the part is attached to the aircraft fuselage), and the expected defects under in-service conditions, something still under study. The objective of this work is to assess the inspection, in-service, of this kind of parts, by selecting and customizing the most suitable NDT methods, according to the type and maximum tolerable damage sizes estimated by a fatigue life prediction evaluation.en
dc.description.sponsorshipH2020, 690689, Bionic Aircraften
dc.language.isospaen
dc.publisherAENDen
dc.titleIN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689)en
dc.typeconferenceObjecten
dc.relation.projectIDinfo:eu-repo/grantAgreement/EC/H2020/690689/EU/Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle/Bionic Aircraften
dc.rights.accessRightsopenAccessen
dc.subject.keywordsAeronautic Partsen
dc.subject.keywordsAdditive Layer Manufacturingen
dc.subject.keywordsIn-service inspectionen
dc.conference.title14º Congreso Nacional de Ensayos No Destructivos, celebrado en Vitoria-Gasteiz del 12 al 14 de junio de 2019en


Files in this item

Thumbnail

    Show simple item record