Show simple item record

dc.contributor.authorLagos, M.A.
dc.contributor.authorPellegrini, C.
dc.contributor.authorAgote, I.
dc.contributor.authorAzurmendi, N.
dc.contributor.authorBarcena, J.
dc.contributor.authorParco, M.
dc.contributor.authorSilvestroni, L.
dc.contributor.authorZoli, L.
dc.contributor.authorSciti, D.
dc.date.accessioned2019-03-28T10:57:39Z
dc.date.available2019-03-28T10:57:39Z
dc.date.issued2019-08
dc.identifier.citationM.A. Lagos, C. Pellegrini, I. Agote, N. Azurmendi, J. Barcena, M. Parco, L. Silvestroni, L. Zoli, D. Sciti, Ti3SiC2-Cf composites by spark plasma sintering: Processing, microstructure and thermo-mechanical properties, Journal of the European Ceramic Society, Volume 39, Issue 9, 2019, Pages 2824-2830, ISSN 0955-2219, https://doi.org/10.1016/j.jeurceramsoc.2019.03.037.en
dc.identifier.issn0955-2219en
dc.identifier.urihttp://hdl.handle.net/11556/696
dc.description.abstractMAX phases, and particularly Ti3SiC2, are interesting for high temperature applications. The addition of carbon fibers can be used to reduce the density and to modify the properties of the matrix. This work presents the densification and characterization of Ti3SiC2 based composites with short carbon fibers using a fast and simple fabrication approach: dry mixing and densification by Spark Plasma Sintering. Good densification level was obtained below 1400 °C even with a high amount of fibers. The reaction of the fibers with the matrix is limited thanks to the fast processing time and depends on the amount of fibers in the composite. Bending strength at room temperature, between 437 and 120 MPa, is in the range of conventional CMCs with short fibers and according to the resistance of the matrix and the presence of residual porosity. Thermo-mechanical properties of the composites up to 1500 °C are also presented.en
dc.description.sponsorshipThis work has received funding from the European Union’s Horizon2020 “Research and innovation programme” under grant agreement No 685594 (C3HARME)en
dc.language.isoengen
dc.publisherElsevieren
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.titleTi3SiC2-Cf composites by spark plasma sintering: Processing, microstructure and thermo-mechanical propertiesen
dc.typejournal articleen
dc.identifier.doi10.1016/j.jeurceramsoc.2019.03.037en
dc.relation.projectIDinfo:eu-repo/grantAgreement/EC/H2020/685594/EU/NEXT GENERATION CERAMIC COMPOSITES FOR COMBUSTION HARSH ENVIRONMENTS AND SPACE/C3HARMEen
dc.rights.accessRightsopen accessen
dc.subject.keywordsCeramic matrix compositesen
dc.subject.keywordsMax phasesen
dc.subject.keywordsInterfaceen
dc.subject.keywordsMechanical propertiesen
dc.subject.keywordsSinteringen
dc.subject.keywordsSPSen
dc.subject.keywordsSpark plasma sinteringen
dc.identifier.essn1873-619Xen
dc.issue.number9
dc.journal.titleJournal of the European Ceramic Societyen
dc.page.final2830
dc.page.initial2824
dc.volume.number39


Files in this item

Thumbnail

    Show simple item record

    Attribution 4.0 InternationalExcept where otherwise noted, this item's license is described as Attribution 4.0 International