Show simple item record

dc.contributor.authorOrtiz, Mikel
dc.contributor.authorPenalva, Mariluz
dc.contributor.authorIriondo, Edurne
dc.contributor.authorLópez de Lacalle, Luis Norberto
dc.date.accessioned2019-02-22T09:39:19Z
dc.date.available2019-02-22T09:39:19Z
dc.date.issued2019
dc.identifier.citationOrtiz, M., Penalva, M., Iriondo, E. et al. Investigation of Thermal-Related Effects in Hot SPIF of Ti–6Al–4V Alloy. Int. J. of Precis. Eng. and Manuf.-Green Tech. 7, 299–317 (2020). https://doi.org/10.1007/s40684-019-00038-zen
dc.identifier.issn2288-6206en
dc.identifier.urihttp://hdl.handle.net/11556/688
dc.description.abstractThe present work focuses on a new approach to hot form hard-to-work materials by Single Point Incremental Forming (SPIF) technology using a global heating of the sheet. A set of trials was carried out in order to identify the optimum temperature cycles to minimize geometric distortions associated to each process stage on the fabrication of parts made of Ti–6Al–4V. On the one hand, heating trials allowed defining the optimal procedure to improve the temperature distribution homogeneity along the sheet and consequently to minimize its thermal distortion previous to the forming stage. On the other hand, the influence of both working temperature and the applied cooling on the geometric accuracy was evaluated by means of SPIF trials. For this purpose, a generic asymmetric design with typical aeronautical features was used. These trials pointed out that high forming temperatures allow reducing significantly the material springback whereas a controlled cooling (with an intermediate stress relief treatment) minimizes both the distortion of the part during the cooling and the mechanical stresses accumulated on the clamping system. Furthermore, the work includes a post-forming material evaluation to determinate the influence of the employed processing conditions on microcracks, alpha-case layer, microstructure and hardness.en
dc.description.sponsorshipResearch leading to these results was done within the project INMA—Innovative manufacturing of complex titanium sheet components. This project has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under grant agreement no. 266208.en
dc.language.isoengen
dc.publisherSpringer Natureen
dc.titleInvestigation of Thermal-Related Effects in Hot SPIF of Ti–6Al–4V Alloyen
dc.typearticleen
dc.identifier.doi10.1007/s40684-019-00038-zen
dc.relation.projectIDinfo:eu-repo/grantAgreement/EC/FP7/266208/EU/Innovative Manufacturing of complex Ti sheet components/INMAen
dc.rights.accessRightsembargoedAccessen
dc.subject.keywordsTi–6Al–4Ven
dc.subject.keywordsIncremental formingen
dc.subject.keywordsGlobal heatingen
dc.subject.keywordsHeating equipmenten
dc.subject.keywordsTemperature cyclesen
dc.subject.keywordsGeometric accuracyen
dc.identifier.essn2198-0810en
dc.journal.titleInternational Journal of Precision Engineering and Manufacturing-Green Technologyen
dc.page.final317
dc.page.initial299
dc.volume.number7


Files in this item

Thumbnail

    Show simple item record