Show simple item record

dc.contributor.authorMonteserín, Cristina
dc.contributor.authorBlanco, Miren
dc.contributor.authorMurillo, Nieves
dc.contributor.authorPérez-Márquez, Ana
dc.contributor.authorMaudes, Jon
dc.contributor.authorGayoso, Jorge
dc.contributor.authorLaza, Jose
dc.contributor.authorAranzabe, Estíbaliz
dc.contributor.authorVilas, Jose
dc.date.accessioned2018-11-12T11:34:08Z
dc.date.available2018-11-12T11:34:08Z
dc.date.issued2018
dc.identifier.citationMonteserín, Cristina, Miren Blanco, Nieves Murillo, Ana Pérez-Márquez, Jon Maudes, Jorge Gayoso, Jose Laza, Estíbaliz Aranzabe, and Jose Vilas. “Effect of Different Types of Electrospun Polyamide 6 Nanofibres on the Mechanical Properties of Carbon Fibre/Epoxy Composites.” Polymers 10, no. 11 (October 25, 2018): 1190. doi:10.3390/polym10111190.en
dc.identifier.issn2073-4360en
dc.identifier.urihttp://hdl.handle.net/11556/641
dc.description.abstractDelamination and brittle matrix fracture have long since been the biggest problems in fibre-reinforced composites. Recently, the incorporation of electrospun nanofibre veils has been shown to be an effective method for improving the mechanical properties of these composites, without causing process problems and negatively affecting other mechanical properties. Thus, these nanofibres have the potential to be used as thickness-reinforcing materials in composites. This paper investigates the effect of incorporating standalone electrospun nanofibre veils made of two different types of polyamide 6 (PA6) on the mechanical properties of carbon fibre/epoxy composites. The influence of positioning the electrospun veils at different interlaminar positions of the laminate has also been investigated.en
dc.description.sponsorshipAuthors would like to acknowledge the Basque Government funding within the ELKARTEK Programme, “ACTIMAT”, and grupos de investigación del sistema universitario vasco (IT718-13) Also the authors acknowledge the funding from the Spanish government through the project TEC2015-63838-C3-1-R-OPTONANOSENS and from the Basque government through the project KK-2017/00089-µ4F. And we would like to thanks BASF for the useful supporting in the thermoplastic materials selection.en
dc.language.isoengen
dc.publisherMDPI AGen
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.titleEffect of Different Types of Electrospun Polyamide 6 Nanofibres on the Mechanical Properties of Carbon Fibre/Epoxy Compositesen
dc.typearticleen
dc.identifier.doi10.3390/polym10111190en
dc.rights.accessRightsopenAccessen
dc.subject.keywordsCarbon fibresen
dc.subject.keywordsPolymer matrix composites (PMCs)en
dc.subject.keywordsDelaminationen
dc.subject.keywordsFracture toughnessen
dc.subject.keywordsElectrospun nanofibresen
dc.identifier.essn2073-4360en
dc.issue.number11en
dc.journal.titlePolymersen
dc.page.initial1190en
dc.volume.number10en


Files in this item

Thumbnail

    Show simple item record

    Attribution 4.0 InternationalExcept where otherwise noted, this item's license is described as Attribution 4.0 International