Show simple item record

dc.contributor.authorLópez de Ipiña, J.M.
dc.contributor.authorHernan, Angel
dc.contributor.authorCenigaonaindia, Xabier
dc.contributor.authorInsunza, Mario
dc.contributor.authorFlorez, Sonia
dc.contributor.authorSeddon, Richard
dc.contributor.authorVavouliotis, Antonios
dc.contributor.authorKostopoulos, Vasilios
dc.contributor.authorLatko, Paulina
dc.contributor.authorDurałek, Paweł
dc.contributor.authorKchit, Nadir
dc.date.accessioned2017-12-11T15:07:43Z
dc.date.available2017-12-11T15:07:43Z
dc.date.issued2017
dc.identifier.citationLópez de Ipiña, Jesús M, Angel Hernan, Xabier Cenigaonaindia, Mario Insunza, Sonia Florez, Richard Seddon, Antonios Vavouliotis, et al. “Implementation of a Safe-by-Design Approach in the Development of New Open Pilot Lines for the Manufacture of Carbon Nanotube-Based Nano-Enabled Products.” Journal of Physics: Conference Series 838 (June 1, 2017): 012018. doi:10.1088/1742-6596/838/1/012018.en
dc.identifier.issn1742-6588en
dc.identifier.urihttp://hdl.handle.net/11556/470
dc.description.abstractThe project PLATFORM (H2020, GA 646307) aims to develop three new pilot lines (PPLs) for the manufacture of carbon nanotube-based nano-enabled products (buckypapers, treated prepregs, doped veils), for the European aeronautics and automotive industries (a Technology Readiness Level 6 - TRL6 -is expected at the end of the project). The Machinery Directive 2006/42/EC (MD) - transposed into the respective national legislations -is the European regulatory framework for the design and construction of new machinery, as the future PPLs. PPLs are not required to comply with the provisions of the MD until they are put into service - expected in 2020, after project completion - but then, the MD will be fully applicable. In this regulatory context, the project PLATFORM is aligning the design of the PPLs according to the MD requirements, in order to facilitate the CE marking in 2020 (TRL9) and avoid potential economic costs associated with future re-adaptations or modifications needed to ensure compliance with the MD. This paper discusses the methodological approach followed by the project PLATFORM to integrate all the nanosafety aspects in the design of the PPLs, in order to achieve safe designs in conformity with the relevant Essential Health and Safety Requirements (EHSRs) of the MD. Since machinery must be designed and constructed taking into account the results of the risk assessment (RA), this paper describes the systematic and iterative approach for RA and risk reduction followed to eliminate hazards as far practicable and to adequately reduce risks by the implementation of protective measures. This process has been guided by the harmonized standards EN ISO 12100 and EN ISO 14123, taking the relevant phases of life cycle, expected uses and operation modes of the PPLs into account. A specific tool to guide the safe design of the PPLs and facilitate the RA process has also been produced by the project (PLATFORM -SbD toolkit).en
dc.description.sponsorshipThe project PLATFORM has received funding from the European Union's Horizon 2020 research and innovation programme, under grant agreement No 646307.en
dc.language.isoengen
dc.publisherIOP PUBLISHING LTD, DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLANDen
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.titleImplementation of a safe-by-design approach in the development of new open pilot lines for the manufacture of carbon nanotube-based nano-enabled productsen
dc.typeconferenceObjecten
dc.identifier.doi10.1088/1742-6596/838/1/012018en
dc.isiYesen
dc.relation.projectIDinfo:eu-repo/grantAgreement/EC/H2020/646307/EU/Open access pilot plants for sustainable industrial scale nanocomposites manufacturing based on buckypapers, doped veils and prepregs/PLATFORMen
dc.rights.accessRightsopenAccessen
dc.subject.keywordsNanomaterialsen
dc.subject.keywordsRisksen
dc.subject.keywordsAeronauticsen
dc.subject.keywordsAutomotive industryen
dc.subject.keywordsNanosafety aspectsen
dc.journal.titleJournal of Physics: Conference Seriesen
dc.volume.number838en
dc.conference.title5TH NANOSAFE INTERNATIONAL CONFERENCE ON HEALTH AND SAFETY ISSUES RELATED TO NANOMATERIALS FOR A SOCIALLY RESPONSIBLE APPROACH (NANOSAFE 2016)en


Files in this item

Thumbnail

    Show simple item record

    Attribution 4.0 InternationalExcept where otherwise noted, this item's license is described as Attribution 4.0 International