Show simple item record

dc.contributor.authorDel Sol, I.
dc.contributor.authorRivero, A.
dc.contributor.authorSalguero, J.
dc.contributor.authorFernández-Vidal, S.R.
dc.contributor.authorMarcos, M.
dc.date.accessioned2017-11-08T14:39:34Z
dc.date.available2017-11-08T14:39:34Z
dc.date.issued2017
dc.identifier.citationDel Sol, I., A. Rivero, J. Salguero, S.R. Fernández-Vidal, and M. Marcos. “Tool-Path Effect on the Geometric Deviations in the Machining of UNS A92024 Aeronautic Skins.” Procedia Manufacturing 13 (2017): 639–646. doi:10.1016/j.promfg.2017.09.134.en
dc.identifier.issn2351-9789en
dc.identifier.urihttp://hdl.handle.net/11556/447
dc.description.abstractTraditionally, aeronautics skins are being machined by chemical milling, a high-pollutant process. An efficient alternative to this technology is conventional machining. However, to ensure the parts machined with this process keeps the industrial quality controls, the effect of tool-path might be characterized, specially analyzing final thickness and roughness. In this paper, five different tool-paths have been applied under the same machining parameters in the dry milling of Al-Cu UNS A92024 thin plates. Machining time, final thickness and roughness have been evaluated. Most roughness and thickness results are under the industrial quality limits stablished for this type of parts.en
dc.description.sponsorshipThis work has received financial support from Spanish Goverment (Project DPI2015-71448-R), TECNALIA Research & Innovation and the University of Cadiz (University training plan UCA/REC01VI/2016).en
dc.language.isoengen
dc.publisherELSEVIER SCIENCE BV, SARA BURGERHARTSTRAAT 25, PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDSen
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.titleTool-path effect on the geometric deviations in the machining of UNS A92024 aeronautic skinsen
dc.typeconferenceObjecten
dc.identifier.doi10.1016/j.promfg.2017.09.134en
dc.isiYesen
dc.rights.accessRightsopenAccessen
dc.subject.keywordsMetal skinen
dc.subject.keywordsMillingen
dc.subject.keywordsMachiningen
dc.subject.keywordsTool-pathen
dc.subject.keywordsRoughnessen
dc.journal.titleProcedia Manufacturingen
dc.page.final646en
dc.page.initial639en
dc.volume.number13en


Files in this item

Thumbnail

    Show simple item record

    Attribution-NonCommercial-NoDerivatives 4.0 InternationalExcept where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International