dc.contributor.author | Carrera, E. A. | |
dc.contributor.author | Ramírez-Ramírez, J. H. | |
dc.contributor.author | Pérez-González, F. A. | |
dc.contributor.author | González, J. A. | |
dc.contributor.author | Crespo, I. | |
dc.contributor.author | Braceras, I. | |
dc.contributor.author | Martínez-de-la-Pera, I. | |
dc.contributor.author | Larrañaga, A. | |
dc.contributor.author | Garza-Montes-de-Oca, N. F. | |
dc.contributor.author | Pérez-Unzueta, A. J. | |
dc.contributor.author | Talamantes-Silva, J. | |
dc.contributor.author | Cavazos, J. L. | |
dc.contributor.author | Colás, R. | |
dc.date.accessioned | 2017-02-09T11:51:48Z | |
dc.date.available | 2017-02-09T11:51:48Z | |
dc.date.issued | 2017 | |
dc.identifier.citation | E. A. Carrera, J. H. Ramírez-Ramírez, F. A. Pérez-González, J. A.
González, I. Crespo, I. Braceras, I. Martínez-de-la-Pera, A. Larrañaga, N. F. Garza-Montesde-
Oca, A. J. Pérez-Unzueta, J. Talamantes-Silva, J. L. Cavazos & R. Colás (2017): Molten
aluminium attack on iron based alloys, International Journal of Cast Metals Research, DOI:
10.1080/13640461.2017.1283878 | |
dc.identifier.issn | 1364-0461 | en |
dc.identifier.uri | http://hdl.handle.net/11556/367 | |
dc.description.abstract | Liquid aluminium alloys affect the moulds, by formation of intermetallic layers at their surface;
such attack is enhanced by the flow of the molten metal on the surface of the tooling. Metal
tooling are used to promote high heat transfer rates and increase the solidification rate to enhance
mechanical properties in cast pieces, but the damage to their surface affects their quality and
increases the production costs due to the need to repair them. This work presents the results of
a series of studies conducted to evaluate the attack produced by molten aluminium on samples
of iron based materials commonly used in the manufacture of dies and moulds. The studies
were conducted in a machine that imposes a rotating movement to experimental specimens to
simulate the flow of liquid metal. The damage observed in the samples was compared to that
experienced by tooling in the melt shop. | en |
dc.description.sponsorship | The authors thank the Mexican National Council for Science
and Technology (CONACYT), Mexico, and CDTI (Centro de
Desarrollo Tecnológico Industrial), Spain, and the Program for
the Support of Scientific and Technological Research (PAICYT)
of UANL, for the support of this project. | en |
dc.language.iso | eng | en |
dc.publisher | Taylor & Francis | en |
dc.title | Molten aluminium attack on iron based alloys | en |
dc.type | journal article | en |
dc.identifier.doi | 10.1080/13640461.2017.1283878 | en |
dc.isi | Yes | en |
dc.rights.accessRights | embargoed access | en |
dc.subject.keywords | Liquid metal attack | en |
dc.subject.keywords | Aluminium | en |
dc.subject.keywords | Steel toolings | en |
dc.subject.keywords | Intermetallics | en |
dc.identifier.essn | 1743-1336 | en |
dc.issue.number | 1 | en |
dc.journal.title | International Journal of Cast Metals Research | en |
dc.page.final | 9 | en |
dc.page.initial | 1 | en |
dc.volume.number | 30 | en |