Show simple item record

dc.contributor.authorPrieto, Cristina
dc.contributor.authorRuiz-Cabañas, F. Javier
dc.contributor.authorMadina, Virginia
dc.contributor.authorFernández, A. Inés
dc.contributor.authorCabeza, Luisa F.
dc.date.accessioned2022-11-22T15:09:37Z
dc.date.available2022-11-22T15:09:37Z
dc.date.issued2022-11
dc.identifier.citationPrieto, Cristina, F. Javier Ruiz-Cabañas, Virginia Madina, A. Inés Fernández, and Luisa F. Cabeza. “Corrosion Performance of Alloy 800H and Alloy 625 for Potential Use as Molten Salts Solar Receiver Materials in Concentrating Solar Power Tower Plants.” Journal of Energy Storage 55 (November 2022): 105824. https://doi.org/10.1016/j.est.2022.105824.en
dc.identifier.issn2352-152Xen
dc.identifier.urihttp://hdl.handle.net/11556/1433
dc.description.abstractTwo high corrosion resistant super-alloys, alloy 800H and alloy 625, were evaluated for corrosion compatibility with molten nitrate salts at 565 °C under air atmosphere since these super-alloys are possible candidates for the manufacturing of molten salts solar receivers in the CSP tower technology. Both alloys are tested in two different molten nitrate salts grades to identify how the impurities of the final mixture affect to corrosion damage. Accordingly, a technical grade molten nitrate salt (Solar_Salt_T) and refined molten nitrate salt (Solar_Salt_R) are selected as test media. In addition to corrosion rates calculation, techniques such as XRD, EDS, optical and scanning electron microscopy are used to identify the corrosion morphology and oxides layers chemistry. Alloy 800H and alloy 625 show uniform corrosion after testing without detecting localized phenomena such as pitting, stress corrosion cracking, crevice, or intergranular corrosion. While alloy 800H develops a duplex oxide layer consisting of iron oxides in its external part, and chromium oxide in its innermost layer, alloy 625 generates a compact and highly adherent oxide layer consisting mainly of nickel oxide. Corrosion rates decrease with time, being higher for alloys exposed to Solar_Salt_T mixtures. Moreover, alloy 625 shows lower corrosion rates than alloy 800H in all conditions tested in this study.en
dc.description.sponsorshipThe research leading to these results has received funding from CENIT ConSOLida. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE and RTI2018-093849-B-C32 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors from University of Lleida and University of Barcelona would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537) and research group DIOPMA (2017 SGR 138). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.en
dc.language.isoengen
dc.publisherElsevier Ltden
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.titleCorrosion performance of alloy 800H and alloy 625 for potential use as molten salts solar receiver materials in concentrating solar power tower plantsen
dc.typejournal articleen
dc.identifier.doi10.1016/j.est.2022.105824en
dc.rights.accessRightsopen accessen
dc.subject.keywordsCorrosionen
dc.subject.keywordsMolten nitrate salten
dc.subject.keywordsAlloy 625en
dc.subject.keywordsAlloy 800Hen
dc.subject.keywordsSolar receiveren
dc.journal.titleJournal of Energy Storageen
dc.page.initial105824en
dc.volume.number55, Part Den


Files in this item

Thumbnail

    Show simple item record

    Attribution 4.0 InternationalExcept where otherwise noted, this item's license is described as Attribution 4.0 International