Show simple item record

dc.contributor.authorSerrano, Angel
dc.contributor.authorGarrido, Ignacio
dc.contributor.authorSantos, Sergio
dc.contributor.authorDuran, Mikel
dc.contributor.authorDauvergne, Jean-Luc
dc.contributor.authorCarmona, Manuel
dc.contributor.authorPalomo Del Barrio, Elena
dc.date.accessioned2022-09-28T15:26:43Z
dc.date.available2022-09-28T15:26:43Z
dc.date.issued2022-11-25
dc.identifier.citationSerrano, Angel, Ignacio Garrido, Sergio Santos, Mikel Duran, Jean-Luc Dauvergne, Manuel Carmona, and Elena Palomo Del Barrio. “Effect of Processing on Microstructure and Mechanical Properties of Pentaglycerine Based Solid-Solid Phase Change Materials.” Journal of Energy Storage 55 (November 2022): 105677. https://doi.org/10.1016/j.est.2022.105677.en
dc.identifier.issn2352-152Xen
dc.identifier.urihttp://hdl.handle.net/11556/1412
dc.description.abstractThe present work addresses the lack of reported information about the mechanical properties of solid-solid PCMs, and how these are affected by their processing, considering that they usually incorporate fillers to increase their thermal conductivity. To this end, this work analyzes pentaglycerine (PG) based composites, which are of great interest in TES intended for 80 °C. These composites are also doped with various contents of expanded graphite (EG) with two different particle sizes. With these combinations, the effect of two typical processing methods, pressing and casting, on the microstructure of the composites is evaluated. Furthermore, the mechanical behavior of these composites in both crystal and plastic phases, as well as their thermal expansion during the transition process, is also reported in the current study. Besides demonstrating the important role that processing plays in these properties in PG/EG-based composites, it has been found that the use of EG is also beneficial for mitigating the permanent deformations experienced by these composites during thermal cycling. Finally, the exposed results give the first evidence of the interesting effect these processing methods have on the thermal properties of the composites.en
dc.description.sponsorshipThis research was funded by the FEDER/Ministerio de Ciencia e Innovaci ́on–Agencia Estatal de Investigacion, SWEET-TES project (RTI2018-099557-B-C21), as well as from The Basque Government (Elkartek CICe2020, KK-2020/00078). The authors also gratefully acknowledge Yagmur Polat and Cristina Luengo for their technical support.en
dc.language.isoengen
dc.publisherElsevier Ltden
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.titleEffect of processing on microstructure and mechanical properties of pentaglycerine based solid-solid phase change materialsen
dc.typejournal articleen
dc.identifier.doi10.1016/j.est.2022.105677en
dc.rights.accessRightsopen accessen
dc.subject.keywordsSolid-solid phase change materialen
dc.subject.keywordsPlastic crystalen
dc.subject.keywordsPentaglycerineen
dc.subject.keywordsExpanded graphiteen
dc.subject.keywordsProcessingen
dc.journal.titleJournal of Energy Storageen
dc.page.initial105677en
dc.volume.number55 Part Cen


Files in this item

Thumbnail

    Show simple item record

    Attribution-NonCommercial-NoDerivatives 4.0 InternationalExcept where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International