Show simple item record

dc.contributor.authorBhujangrao, Trunal
dc.contributor.authorVeiga, Fernando
dc.contributor.authorPenalva, Mariluz
dc.contributor.authorCostas, Adriana
dc.contributor.authorRuiz, Cristina
dc.date.accessioned2022-03-20T22:11:36Z
dc.date.available2022-03-20T22:11:36Z
dc.date.issued2022-01-25
dc.identifier.citationBhujangrao, Trunal, Fernando Veiga, Mariluz Penalva, Adriana Costas, and Cristina Ruiz. “Three-Dimensional Finite Element Modelling of Sheet Metal Forming for the Manufacture of Pipe Components: Symmetry Considerations.” Symmetry 14, no. 2 (January 25, 2022): 228. doi:10.3390/sym14020228.en
dc.identifier.urihttp://hdl.handle.net/11556/1291
dc.description.abstractThe manufacture of parts by metal forming is a widespread technique in sectors such as oil and gas and automotives. It is therefore important to make a research effort to know the correct set of parameters that allow the manufacture of correct parts. This paper presents a process analysis by means of the finite element model. The use case presented in this paper is that of a 3-m diameter pipe component with a thickness of 22 mm. In this type of application, poor selection of process conditions can result in parts that are out of tolerance, both in dimensions and shape. A 3D finite element model is made, and the symmetry of the tube section generated in 2D is analysed. As a novelty, an analysis of the process correction as a function of the symmetrical deformation of the material in this case in the form of a pipe is carried out. The results show a correct fitting of the model and give guidelines for manufacturing.en
dc.description.sponsorshipThe authors acknowledge the funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 958303.en
dc.language.isoengen
dc.publisherMultidisciplinary Digital Publishing Institute (MDPI)en
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.titleThree-Dimensional Finite Element Modelling of Sheet Metal Forming for the Manufacture of Pipe Components: Symmetry Considerationsen
dc.typearticleen
dc.identifier.doi10.3390/sym14020228en
dc.relation.projectIDinfo:eu-repo/grantAgreement/EC/H2020/958303/EU/Closed-loop digital pipeline for a flexible and modular manufacturing of large components/PENELOPEen
dc.rights.accessRightsopenAccessen
dc.subject.keywordsFinite element modellingen
dc.subject.keywordsSymmetry assessmentsen
dc.subject.keywordsSteelen
dc.subject.keywordsMaterial deformationen
dc.identifier.essn2073-8994en
dc.issue.number2en
dc.journal.titleSymmetryen
dc.page.initial228en
dc.volume.number14en


Files in this item

Thumbnail

    Show simple item record

    Attribution 4.0 InternationalExcept where otherwise noted, this item's license is described as Attribution 4.0 International