Show simple item record

dc.contributor.authorLumbreras, Mikel
dc.contributor.authorGaray-Martinez, Roberto
dc.contributor.authorArregi, Beñat
dc.contributor.authorMartin-Escudero, Koldobika
dc.contributor.authorDiarce, Gonzalo
dc.contributor.authorRaud, Margus
dc.contributor.authorHagu, Indrek
dc.date.accessioned2021-10-21T15:31:02Z
dc.date.available2021-10-21T15:31:02Z
dc.date.issued2022-01-15
dc.identifier.citationLumbreras, Mikel, Roberto Garay-Martinez, Beñat Arregi, Koldobika Martin-Escudero, Gonzalo Diarce, Margus Raud, and Indrek Hagu. “Data Driven Model for Heat Load Prediction in Buildings Connected to District Heating by Using Smart Heat Meters.” Energy 239 (January 2022): 122318. doi:10.1016/j.energy.2021.122318.
dc.identifier.issn0360-5442en
dc.identifier.urihttp://hdl.handle.net/11556/1217
dc.description.abstractAn accurate characterization and prediction of heat loads in buildings connected to a District Heating (DH) network is crucial for the effective operation of these systems. The high variability of the heat production process of DH networks with low supply temperatures and derived from the incorporation of different heat sources increases the need for heat demand prediction models. This paper presents a novel data-driven model for the characterization and prediction of heating demand in buildings connected to a DH network. This model is built on the so-called Q-algorithm and fed with real data from 42 smart energy meters located in 42 buildings connected to the DH in Tartu (Estonia). These meters deliver heat consumption data with a 1-h frequency. Heat load profiles are analysed, and a model based on supervised clustering methods in combination with multiple variable regression is proposed. The model makes use of four climatic variables, including outdoor ambient temperature, global solar radiation and wind speed and direction, combined with time factors and data from smart meters. The model is designed for deployment over large sets of the building stock, and thus aims to forecast heat load regardless of the construction characteristics or final use of the building. The low computational cost required by this algorithm enables its integration into machines with no special requirements due to the equations governing the model. The data-driven model is evaluated both statistically and from an engineering or energetic point of view. R2 values from 0.70 to 0.99 are obtained for daily data resolution and R2 values up to 0.95 for hourly data resolution. Hourly results are very promising for more than 90% of the buildings under study.en
dc.description.sponsorshipEuropean Commission, RELaTED: h2020, GA nº 768567en
dc.language.isoengen
dc.publisherElsevieren
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.titleData driven model for heat load prediction in buildings connected to District Heating by using smart heat metersen
dc.typejournal articleen
dc.identifier.doi10.1016/j.energy.2021.122318en
dc.relation.projectIDinfo:eu-repo/grantAgreement/EC/H2020/768567/EU/REnewable Low TEmperature District/RELaTEDen
dc.rights.accessRightsopen accessen
dc.subject.keywordsLoad forecastingen
dc.subject.keywordsHeat metersen
dc.subject.keywordsData-driven modelen
dc.subject.keywordsBuildingen
dc.subject.keywordsDistrict Heatingen
dc.identifier.essn1873-6785en
dc.journal.titleEnergyen
dc.page.initial122318
dc.volume.number239, part D


Files in this item

Thumbnail
Thumbnail

    Show simple item record

    Attribution 4.0 InternationalExcept where otherwise noted, this item's license is described as Attribution 4.0 International