Show simple item record

dc.contributor.authorCasuso, Mikel
dc.contributor.authorVeiga, Fernando
dc.contributor.authorSuárez, Alfredo
dc.contributor.authorBhujangrao, Trunal
dc.contributor.authorAldalur, Eider
dc.contributor.authorArtaza, Teresa
dc.contributor.authorAmondarain, Jaime
dc.contributor.authorLamikiz, Aitzol
dc.date.accessioned2021-05-04T11:03:55Z
dc.date.available2021-05-04T11:03:55Z
dc.date.issued2021-04-21
dc.identifier.citationCasuso, Mikel, Fernando Veiga, Alfredo Suárez, Trunal Bhujangrao, Eider Aldalur, Teresa Artaza, Jaime Amondarain, and Aitzol Lamikiz. “Model for the Prediction of Deformations in the Manufacture of Thin-Walled Parts by Wire Arc Additive Manufacturing Technology.” Metals 11, no. 5 (April 21, 2021): 678. doi:10.3390/met11050678.en
dc.identifier.urihttp://hdl.handle.net/11556/1127
dc.description.abstractGas Metal Arc Welding (GMAW) is a manufacturing technology included within the differentWire Arc Additive Manufacturing alternatives. These technologies have been generating great attention among scientists in recent decades. Its main qualities that make it highly productive with a large use of material with relatively inexpensive machine solutions make it a very advantageous technology. This paper covers the application of this technology for the manufacture of thin-walled parts. A finite element model is presented for estimating the deformations in this type of parts. This paper presents a simulation model that predicts temperatures with less than 5% error and deformations of the final part that, although quantitatively has errors of 20%, qualitatively allows to know the deformation modes of the part. Knowing the part areas subject to greater deformation may allow the future adaptation of deposition strategies or redesigns for their adaptation. These models are very useful both at a scientific and industrial level since when we find ourselves with a technology oriented to Near Net Shape (NNS) manufacturing where deformations are critical for obtaining the final part in a quality regime.en
dc.description.sponsorshipThis research was funded by the vice-counseling of technology, innovation and competitiveness of the Basque Government grant agreement kk-2019/00004 (PROCODA project) and the QUALYFAM project, through the ELKARTEK 2020 (KK-2020/00042) and the ADIFIX project funded by HAZITEK 2019 and 2020 (ZL-2019/00738, ZL-2020/00073) programs and the Spanish Government CDTI-Red Cervera Programme (EXP 00123730/IDI-20191162).en
dc.language.isoengen
dc.publisherMultidisciplinary Digital Publishing Institute (MDPI)en
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.titleModel for the Prediction of Deformations in the Manufacture of Thin-Walled Parts by Wire Arc Additive Manufacturing Technologyen
dc.typearticleen
dc.identifier.doi10.3390/met11050678en
dc.rights.accessRightsopenAccessen
dc.subject.keywordsThin wall manufacturingen
dc.subject.keywordsAdditive manufacturingen
dc.subject.keywordsProcess modellingen
dc.identifier.essn2075-4701en
dc.issue.number5en
dc.journal.titleMetalsen
dc.page.initial678en
dc.volume.number11en


Files in this item

Thumbnail

    Show simple item record

    Attribution 4.0 InternationalExcept where otherwise noted, this item's license is described as Attribution 4.0 International