Recently added

Two-Stage Multi-Objective Meta-Heuristics for Environmental and Cost-Optimal Energy Refurbishment at District Level

Manjarres, Diana; Mabe, Lara; Oregi, Xabat; Landa-Torres, Itziar (Multidisciplinary Digital Publishing Institute (MDPI), 2019)
article

A Systematic Review of International Clinical Guidelines for Rehabilitation of People With Neurological Conditions: What Recommendations Are Made for Upper Limb Assessment?

Burridge, Jane; Alt Murphy, Margit; Buurke, Jaap; Feys, Peter; Keller, Thierry; [et al.] (Frontiers Media S.A., 2019-06-25)
article

Seasonal Correction of Offshore Wind Energy Potential due to Air Density: Case of the Iberian Peninsula

Ulazia, Alain; Ibarra-Berastegi, Gabriel; Sáenz, Jon; Carreno-Madinabeitia, Sheila; González-Rojí, Santos J. (MDPI AG, 2019)
article

Non-Invasive Ambient Intelligence in Real Life: Dealing with Noisy Patterns to Help Older People

Antón, Miguel Ángel; Ordieres-Meré, Joaquín; Saralegui, Unai; Sun, Shengjing (Multidisciplinary Digital Publishing Institute (MDPI), 2019)
article

The Consequences of Air Density Variations over Northeastern Scotland for Offshore Wind Energy Potential

Ulazia, Alain; Nafarrate, Ander; Ibarra-Berastegi, Gabriel; Sáenz, Jon; Carreno-Madinabeitia, Sheila (MDPI, 2019)
article

La importancia de la cultura tecnológica en el movimiento maker

Tabarés Gutiérrez, Raúl (CSIC Consejo Superior de Investigaciones Cientificas, 2018)
article

Dedicated versus mainstreaming approaches in local climate plans in Europe

Reckien, D.; Salvia, M.; Pietrapertosa, F.; Simoes, S.G.; Olazabal, M.; [et al.] (Elsevier Ltd, 2019-09)
article

Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches

Del Sol, Irene; Rivero, Asuncion; López de Lacalle, Luis Norberto; Gamez, Antonio Juan (MDPI AG, 2019-06)
article

Product line architecture recovery with outlier filtering in software families: the Apo-Games case study

Lima, Crescencio; Assunção, Wesley KG; Martinez, Jabier; Mendonça, William; Machado, Ivan C; [et al.] (Springer London, 2019-12)
article

O&M Models for Ocean Energy Converters: Calibrating through Real Sea Data

Bloise Thomaz, Tianna; Crooks, David; Medina-Lopez, Encarni; van Velzen, Leonore; Jeffrey, Henry; [et al.] (MDPI AG, 2019)
article

LIFE+2010 QUADMAP Project: results obtained from the analysis of data collected during the application of the new methodology to the pilot quiet areas

Bartalucci, Chiara; Borchi, Francesco; Carfagni, Monica; Governi, Lapo; Luzzi, Sergio; [et al.] (Walter de Gruyter GmbH, 2019)
article

Retos metodológicos para estudiar la vulnerabilidad demográfica y residencial a nivel intraurbano ante los cambios en las fuentes estadísticas habituales.

De Cos Guerra, Olga; Usobiaga Ferrer, Elena (2019)
article

Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: A study under dynamic conditions

Nieto-Maestre, Javier; Muñoz-Sánchez, Belén; Fernández, Angel G.; Faik, Abdessamad; Grosu, Yaroslav; [et al.] (Elsevier Ltd, 2020-02)
article

GIS-3D Platform to Help Decision Making for Energy Rehabilitation in Urban Environments

Izkara, Jose Luis; Egusquiza, Aitziber; Villanueva, A. (IOPscience, 2019)
article

Optimal Phase Swapping in Low Voltage Distribution Networks Based on Smart Meter Data and Optimization Heuristics

Mendia, Izaskun; Gil-López, Sergio; Del Ser, Javier; Bordagaray, Ana González; Prado, Jesús García; [et al.] (Springer Verlag, 2017)
conferenceObject

Exploring the role of ICT on household behavioural energy efficiency to mitigate global warming

Bastida, Leire; Cohen, Jed J.; Kollmann, Andrea; Moya, Ana; Reichl, Johannes (Elsevier Ltd, 2019-04)
article

Predictive maintenance of wind turbine low-speed shafts based on an autonomous ultrasonic system

Galarza-Urigoitia, Nekane; Rubio-García, Benjamín; Gascón-Álvarez, Jaime; Aznar-Lapuente, Gabriel; Olite-Biurrun, Jorge; [et al.] (Elsevier Ltd, 2019-09)
article

IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689)

Galarza, N.; Rubio, B.; Bereziartua, A.; Lozano, I.; Gascon, Jaime; [et al.] (AEND, 2019)
conferenceObject

Technical and environmental evaluation of a new high performance material based on magnesium alloy reinforced with submicrometre-sized TiC particles to develop automotive lightweight components and make transport sector more sustainable

Ferreira, Victor; Merchán, Mikel; Egizabal, Pedro; García de Cortázar, Maider; Irazustabarrena, Ane; [et al.] (Elsevier Editora Ltda, 2019-05)
article

Accuracy and Surface Quality Improvements in the Manufacturing of Ti-6Al-4V Parts Using Hot Single Point Incremental Forming

Ortiz, Mikel; Penalva, Mariluz; Iriondo, Edurne; López de Lacalle, Luis Norberto (Multidisciplinary Digital Publishing Institute (MDPI), 2019-06)
article

TECNALIA: Recent submissions

Two-Stage Multi-Objective Meta-Heuristics for Environmental and Cost-Optimal Energy Refurbishment at District Level

A Systematic Review of International Clinical Guidelines for Rehabilitation of People With Neurological Conditions: What Recommendations Are Made for Upper Limb Assessment?

Seasonal Correction of Offshore Wind Energy Potential due to Air Density: Case of the Iberian Peninsula

Non-Invasive Ambient Intelligence in Real Life: Dealing with Noisy Patterns to Help Older People

The Consequences of Air Density Variations over Northeastern Scotland for Offshore Wind Energy Potential

La importancia de la cultura tecnológica en el movimiento maker

Dedicated versus mainstreaming approaches in local climate plans in Europe

Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches

Product line architecture recovery with outlier filtering in software families: the Apo-Games case study

O&M Models for Ocean Energy Converters: Calibrating through Real Sea Data

LIFE+2010 QUADMAP Project: results obtained from the analysis of data collected during the application of the new methodology to the pilot quiet areas

Retos metodológicos para estudiar la vulnerabilidad demográfica y residencial a nivel intraurbano ante los cambios en las fuentes estadísticas habituales.

Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: A study under dynamic conditions

GIS-3D Platform to Help Decision Making for Energy Rehabilitation in Urban Environments

Optimal Phase Swapping in Low Voltage Distribution Networks Based on Smart Meter Data and Optimization Heuristics

Exploring the role of ICT on household behavioural energy efficiency to mitigate global warming

Predictive maintenance of wind turbine low-speed shafts based on an autonomous ultrasonic system

IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689)

Technical and environmental evaluation of a new high performance material based on magnesium alloy reinforced with submicrometre-sized TiC particles to develop automotive lightweight components and make transport sector more sustainable

Accuracy and Surface Quality Improvements in the Manufacturing of Ti-6Al-4V Parts Using Hot Single Point Incremental Forming

Browse

My Account

Of interest

TECNALIA: Recent submissions

Two-Stage Multi-Objective Meta-Heuristics for Environmental and Cost-Optimal Energy Refurbishment at District Level ﻿

A Systematic Review of International Clinical Guidelines for Rehabilitation of People With Neurological Conditions: What Recommendations Are Made for Upper Limb Assessment? ﻿

Seasonal Correction of Offshore Wind Energy Potential due to Air Density: Case of the Iberian Peninsula ﻿

Non-Invasive Ambient Intelligence in Real Life: Dealing with Noisy Patterns to Help Older People ﻿

The Consequences of Air Density Variations over Northeastern Scotland for Offshore Wind Energy Potential ﻿

La importancia de la cultura tecnológica en el movimiento maker ﻿

Dedicated versus mainstreaming approaches in local climate plans in Europe ﻿

Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches ﻿

Product line architecture recovery with outlier filtering in software families: the Apo-Games case study ﻿

O&M Models for Ocean Energy Converters: Calibrating through Real Sea Data ﻿

LIFE+2010 QUADMAP Project: results obtained from the analysis of data collected during the application of the new methodology to the pilot quiet areas ﻿

Retos metodológicos para estudiar la vulnerabilidad demográfica y residencial a nivel intraurbano ante los cambios en las fuentes estadísticas habituales. ﻿

Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: A study under dynamic conditions ﻿

GIS-3D Platform to Help Decision Making for Energy Rehabilitation in Urban Environments ﻿

Optimal Phase Swapping in Low Voltage Distribution Networks Based on Smart Meter Data and Optimization Heuristics ﻿

Exploring the role of ICT on household behavioural energy efficiency to mitigate global warming ﻿

Predictive maintenance of wind turbine low-speed shafts based on an autonomous ultrasonic system ﻿

IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689) ﻿

Technical and environmental evaluation of a new high performance material based on magnesium alloy reinforced with submicrometre-sized TiC particles to develop automotive lightweight components and make transport sector more sustainable ﻿

Accuracy and Surface Quality Improvements in the Manufacturing of Ti-6Al-4V Parts Using Hot Single Point Incremental Forming ﻿

Two-Stage Multi-Objective Meta-Heuristics for Environmental and Cost-Optimal Energy Refurbishment at District Level

A Systematic Review of International Clinical Guidelines for Rehabilitation of People With Neurological Conditions: What Recommendations Are Made for Upper Limb Assessment?

Seasonal Correction of Offshore Wind Energy Potential due to Air Density: Case of the Iberian Peninsula

Non-Invasive Ambient Intelligence in Real Life: Dealing with Noisy Patterns to Help Older People

The Consequences of Air Density Variations over Northeastern Scotland for Offshore Wind Energy Potential

La importancia de la cultura tecnológica en el movimiento maker

Dedicated versus mainstreaming approaches in local climate plans in Europe

Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches

Product line architecture recovery with outlier filtering in software families: the Apo-Games case study

O&M Models for Ocean Energy Converters: Calibrating through Real Sea Data

LIFE+2010 QUADMAP Project: results obtained from the analysis of data collected during the application of the new methodology to the pilot quiet areas

Retos metodológicos para estudiar la vulnerabilidad demográfica y residencial a nivel intraurbano ante los cambios en las fuentes estadísticas habituales.

Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: A study under dynamic conditions

GIS-3D Platform to Help Decision Making for Energy Rehabilitation in Urban Environments

Optimal Phase Swapping in Low Voltage Distribution Networks Based on Smart Meter Data and Optimization Heuristics

Exploring the role of ICT on household behavioural energy efficiency to mitigate global warming

Predictive maintenance of wind turbine low-speed shafts based on an autonomous ultrasonic system

IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689)

Technical and environmental evaluation of a new high performance material based on magnesium alloy reinforced with submicrometre-sized TiC particles to develop automotive lightweight components and make transport sector more sustainable

Accuracy and Surface Quality Improvements in the Manufacturing of Ti-6Al-4V Parts Using Hot Single Point Incremental Forming