• Two-Stage Multi-Objective Meta-Heuristics for Environmental and Cost-Optimal Energy Refurbishment at District Level 

  Manjarres, Diana; Mabe, Lara; Oregi, Xabat; Landa-Torres, Itziar (Multidisciplinary Digital Publishing Institute (MDPI), 2019)
  article

• A Systematic Review of International Clinical Guidelines for Rehabilitation of People With Neurological Conditions: What Recommendations Are Made for Upper Limb Assessment? 

  Burridge, Jane; Alt Murphy, Margit; Buurke, Jaap; Feys, Peter; Keller, Thierry; [et al.] (Frontiers Media S.A., 2019-06-25)
  article

• Seasonal Correction of Offshore Wind Energy Potential due to Air Density: Case of the Iberian Peninsula 

  Ulazia, Alain; Ibarra-Berastegi, Gabriel; Sáenz, Jon; Carreno-Madinabeitia, Sheila; González-Rojí, Santos J. (MDPI AG, 2019)
  article

• Non-Invasive Ambient Intelligence in Real Life: Dealing with Noisy Patterns to Help Older People 

  Antón, Miguel Ángel; Ordieres-Meré, Joaquín; Saralegui, Unai; Sun, Shengjing (Multidisciplinary Digital Publishing Institute (MDPI), 2019)
  article

• The Consequences of Air Density Variations over Northeastern Scotland for Offshore Wind Energy Potential 

  Ulazia, Alain; Nafarrate, Ander; Ibarra-Berastegi, Gabriel; Sáenz, Jon; Carreno-Madinabeitia, Sheila (MDPI, 2019)
  article

• La importancia de la cultura tecnológica en el movimiento maker 

  Tabarés Gutiérrez, Raúl (CSIC Consejo Superior de Investigaciones Cientificas, 2018)
  article

• Dedicated versus mainstreaming approaches in local climate plans in Europe 

  Reckien, D.; Salvia, M.; Pietrapertosa, F.; Simoes, S.G.; Olazabal, M.; [et al.] (Elsevier Ltd, 2019-09)
  article

• Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches 

  Del Sol, Irene; Rivero, Asuncion; López de Lacalle, Luis Norberto; Gamez, Antonio Juan (MDPI AG, 2019-06)
  article

• Product line architecture recovery with outlier filtering in software families: the Apo-Games case study 

  Lima, Crescencio; Assunção, Wesley KG; Martinez, Jabier; Mendonça, William; Machado, Ivan C; [et al.] (Springer London, 2019-12)
  article

• O&M Models for Ocean Energy Converters: Calibrating through Real Sea Data 

  Bloise Thomaz, Tianna; Crooks, David; Medina-Lopez, Encarni; van Velzen, Leonore; Jeffrey, Henry; [et al.] (MDPI AG, 2019)
  article

• LIFE+2010 QUADMAP Project: results obtained from the analysis of data collected during the application of the new methodology to the pilot quiet areas 

  Bartalucci, Chiara; Borchi, Francesco; Carfagni, Monica; Governi, Lapo; Luzzi, Sergio; [et al.] (Walter de Gruyter GmbH, 2019)
  article

• Retos metodológicos para estudiar la vulnerabilidad demográfica y residencial a nivel intraurbano ante los cambios en las fuentes estadísticas habituales. 

  De Cos Guerra, Olga; Usobiaga Ferrer, Elena (2019)
  article

• Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: A study under dynamic conditions 

  Nieto-Maestre, Javier; Muñoz-Sánchez, Belén; Fernández, Angel G.; Faik, Abdessamad; Grosu, Yaroslav; [et al.] (Elsevier Ltd, 2020-02)
  article

• GIS-3D Platform to Help Decision Making for Energy Rehabilitation in Urban Environments 

  Izkara, Jose Luis; Egusquiza, Aitziber; Villanueva, A. (IOPscience, 2019)
  article

• Optimal Phase Swapping in Low Voltage Distribution Networks Based on Smart Meter Data and Optimization Heuristics 

  Mendia, Izaskun; Gil-López, Sergio; Del Ser, Javier; Bordagaray, Ana González; Prado, Jesús García; [et al.] (Springer Verlag, 2017)
  conferenceObject

• Exploring the role of ICT on household behavioural energy efficiency to mitigate global warming 

  Bastida, Leire; Cohen, Jed J.; Kollmann, Andrea; Moya, Ana; Reichl, Johannes (Elsevier Ltd, 2019-04)
  article

• Predictive maintenance of wind turbine low-speed shafts based on an autonomous ultrasonic system 

  Galarza-Urigoitia, Nekane; Rubio-García, Benjamín; Gascón-Álvarez, Jaime; Aznar-Lapuente, Gabriel; Olite-Biurrun, Jorge; [et al.] (Elsevier Ltd, 2019-09)
  article

• IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689) 

  Galarza, N.; Rubio, B.; Bereziartua, A.; Lozano, I.; Gascon, Jaime; [et al.] (AEND, 2019)
  conferenceObject

• Technical and environmental evaluation of a new high performance material based on magnesium alloy reinforced with submicrometre-sized TiC particles to develop automotive lightweight components and make transport sector more sustainable 

  Ferreira, Victor; Merchán, Mikel; Egizabal, Pedro; García de Cortázar, Maider; Irazustabarrena, Ane; [et al.] (Elsevier Editora Ltda, 2019-05)
  article

• Accuracy and Surface Quality Improvements in the Manufacturing of Ti-6Al-4V Parts Using Hot Single Point Incremental Forming 

  Ortiz, Mikel; Penalva, Mariluz; Iriondo, Edurne; López de Lacalle, Luis Norberto (Multidisciplinary Digital Publishing Institute (MDPI), 2019-06)
  article

View more